where does the rod come from that goes between the MSV-2 lever and the back of the trigger?
where does the rod come from that goes between the MSV-2 lever and the back of the trigger?
tring to answer PM's again if i missed you please PM again...
Its included in the kit now, But i used the sear arm pin when i first started doing these...Originally Posted by kwood
Zero Gravity Customs
Play hard or go home......
My feedback
https://www.automags.org/forums/showthread.php?t=129891
Is there any difference in using one or the other?Originally Posted by cyberave68
yes and no.Originally Posted by zondo
They both do the same thing so there it's a NO
You need to sand the sear arm pin down to make it short enuff to work, making it useless anymore. So that way you cant re-assemble it into mech unless you have a spare sear. Thats the only difference. Again i offer a pin in my kits now so you dont need to worry about finding another part.
I already have one of your kits, but without the pin. What would it cost separately?Originally Posted by cyberave68
I am making an egomag and have a solenoid on the way, frame, now all I need is a ram right?
I shot you a pm on BEO, but I need to send in my pneumag if you service them. I would also like to add your mag mod.
pm me or call 619-213-6555
Joe
Pin = Nail with the head cut off and sanded down to be smooth.Originally Posted by zondo
any other small rod should work.
-- Feedback--
Will all of this fit into a chimera frame? I just picked one up and the pneu kit I had from a Yframe won't fit.
if i dont already have one of those pins, how much would it cost to obtain one?Originally Posted by cyberave68
i might also want a MSV-2 (with lever, screw and nut)
so how much for the pin and the msv-2?
Well if you really need one i guess if you gave me $1 for shipping i could mail you one. But honestly just about anything small and round should work...Originally Posted by zondo
I will PM you...Originally Posted by DEEPSEA
Yes that will work just fine...Originally Posted by vf-xx
Yes it should fit into a Chimera. Look at your piston an see if it has been sanded on the side. If not it needs to be so it will fit into the top opening of the frame. PM me if you need more help...Originally Posted by joebob09
If you need and MSV-2 they are $15 and i'll give you the pin. Just be sure to put that in the message section of Paypal or i will forget...Originally Posted by kwood
Sent payment for pnuemag kit and extra 90* fitting. thanx
Paypal sent for pneumag kit (black fittings, clear hose), magnet mod and international shipping.
Thanks
PM sent
ho hurry getting back on this question but would a kit fit in a stock frame and do you toke
money orders.
The surgeon general has determined that toking money orders may be harmful to your health.Originally Posted by edwards
Sending PM.
pm'ing you with the parts i need
so what exactly is the differences between your Ram and Luke's Ram?
uh...pm sent...again...
Cyberave's Ram is adjustableOriginally Posted by LK-13
I'm not sure if he has internet yet.......But he just finished moving into his new Castle....so please do not panic if it takes him a few days to reply.
I need to order a complete kit. Let me know when you're able to get back to me.
I will need one of these kits with magmod
Let me know where to send payment and a total
thank ya sir
-SSP-
Could you tell me the lenght, width and height of these parts? I'm trying to get them into a Z-grip.
FABCO MSV-2
CLIPPARD MPA-3
The magmonds come with the mounting brackets, right?
Does any one know the force pull (usually in pounds or grams) of the magnets used in the magnet mod?
They look like they are about the same size as a 0.7-.lb neodymium magnet.
I was thinking of installing some directly into my trigger/trigger frame for use with my cheater trigger.
PM sent
PM sent
PM sent... again... third times the charm...
Nasty Automag! (over under, Box feed, wrap L&R config of 2009 Micromag Bodies with Tacti-cool rail cage/shroud...) he says with an evil laugh...
think that will grab some attention?
OK really sorry for not replying an stuff. Work has me stayn late and i still have tons to do in this freakin house... (and to think i wanted it at some point in time... ) As things look now i wont have much free time for a little while now. I guess its good and bad, at least i have work and a stable job... I will try to force myself to come down to the computer at least 1-2 times a week as see what i can do with some of these PM's and orders people are askin for. I will admit the my response time is beyond very slow at the moment and i'm not sure when it will get better. Again sorry for disappearing but life is calling an i need to answer and i will try to do more here as work permits.
Later,
Cyberave68
P.S. going to do a few PM's before bed...
Money sent for pneumag kit and magmod kit.
I was wondering if Theres any of these kits ready for order? if so id like to order one.
Thanks
TEAM TERMINAL VELOCITY
automag p/f
STOCK INTERNALS
Kapp chrome foregrip
Kapp drop forward
10" boa snakebite
8.5" eliminator
14" J&J Ceramic
Custom Double Triger
revy 9v
pm'd. waiting on response