*Official Automag Pictures*

[mt84]

My new addition to the family

[Flatliner333]

[mpsd]

That's nice but there is one point that's really odd on that marker: If you installed a gauge on the valve's air input, how does the air goes into it? Did you mod it in any way to work like a Classic RT valve?

About the frame, I liked it. As I understand you got a Spyder rocking trigger and modded it for e-pneu operation, right? That should be REALLY fast!

[Flatliner333]

Yes... I moved the rail and everything way forward so I could run the air line through the grip frame and into the bottom of the X Valve. I mounted the solinoid vertical so it pushes up on the back of the sear. This gun is just Electro not E -pnued. It has a Virtue board with eyes and is similar to a DevilMag and yes it is fast. The frame and foregrip I made from scratch. Thanks for the comments.

[mpsd]

Yes... I moved the rail and everything way forward so I could run the air line through the grip frame and into the bottom of the X Valve. I mounted the solinoid vertical so it pushes up on the back of the sear. This gun is just Electro not E -pnued. It has a Virtue board with eyes and is similar to a DevilMag and yes it is fast. The frame and foregrip I made from scratch. Thanks for the comments.

WOW! I would love to see some detailed pics of the frame and mods you've done. And I just realized about the special frame. That's nice!

[Flatliner333]

Thanks here is where it started.
https://www.automags.org/forums/showthread.php?t=248392

[KiNgStiNg]

1 of my new project mags

[KillerOfGiants]

no video section so this is the next place.

was having bolt stick issues so couldnt keep a steady stream up but xvlave w/ goodies, intelli. should be getting it back from mag79 sometime this week with a tune and pneuchimera. plan on tearing up the local field next weekend.

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/gcNCqZI0Jfo&amp;hl=en_US&amp;fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/gcNCqZI0Jfo&amp;hl=en_US&amp;fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

[LinearGoose]

My Mini-Tac

[KillerOfGiants]

not really a pic but there's no vid section soooooooooooooooo

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/kUid0zGcOpE?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/kUid0zGcOpE?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

[SN toter]

I'm sure I posted this before here, but not since I bought it back after regretting selling her. She's mine for good now and heres a new pic

[OPBN]

[munkeh]

my first mag got it from my little brother who got it from a trade sadly she needs a lot of t.l.c. because the idiot my brother got it from neglected it airs up and holds air but farts like and granny with gas gonna have to replace the o-rings and rip it apart and make sure everything insides ok.

it has a level 7 bolt,dye barrel(good self defense tool because its heavy as hell ) dye stickie grips,benchmark frame (says proline on the back of it).

i also have a armson rifled barrel,wooden agd grips that are not pictured.

[nuevara]

My latest creation...



Finish???

[Ando]

That's pretty nice Nuevara. The front grip really complements the Z-Frame.

[nuevara]

That's pretty nice Nuevara. The front grip really complements the grip.

Thanks. Got the z grip for a little over $100. Now I need to put a ULE body and I'll be set, maybe. Thought the grip was pretty unique, but I see there was another one a couple pages back.

[Ando]

Thanks. Got the z grip for a little over $100. Now I need to put a ULE body and I'll be set, maybe. Thought the grip was pretty unique, but I see there was another one a couple pages back.

There's a good amount of them running around. I have one too, just haven't found the right setup for it yet.

[db03]

It has taken me forever to get a picture up, but i made my "DevilMag"... with the help from bigevil and a few others (thanks guys).
This is my new toy!


Rips with the best.

[BigEvil]

It has taken me forever to get a picture up, but i made my "DevilMag"... with the help from bigevil and a few others (thanks guys).
This is my new toy!


Rips with the best.

I reflexively have spasms every time I see that gun

[db03]

It shoots like a champ now.

I reflexively have spasms every time I see that gun

[BrettEAS]

[munkeh]

added macro fittings/lines,gas thru fore-grip,& a home made on/off asa.

[dahoeb]

my baby.

[maniacmechanic]

The Wall , Halloween 2010 ;



A couple more pumps behind the mill & 2 markers in the build stage
EDIT ; & one more in the mail

[mostpeople]

The Wall , Halloween 2010 ;



A couple more pumps behind the mill & 2 markers in the build stage
EDIT ; & one more in the mail

I see 3 guns that I used to own, 1 of which I bought from you and you bought back.

I also see a good # of AKA markers up there

Speaking of that X-mag, how is it treating you? Of all the AGD I owned I do miss that one.

[BigEvil]

[LinearGoose]

Well sense all the cool kids are doing it, I present to you guys my wall of fame...

[CatoRockwell]

Just realized I never posted my finished Automags in our official picture thread.

My E-Tac

My ULE

[Tropical Life]

-Broke her down for future builds, was fun but to crazy, save you some forum space..

[nuevara]

WOW!!! Those are some crazy angles. Nice gun! Do you playwith it that way?

Hi All,

Ok so here is my Zig-Zag Mag,

















Much thanks to this forum for giving me ideas and helping find parts to complete my look

Mag Specs:

ULE body
Standard Rail
Z-GRIP
pyschobalistics drop
Shocktech valve
Cp GAS through grip with Lapco
Lukes grip extender reverse
Eg0 shaft 4
Rotor

Shout to Luke without the foregrip extender no party here.

Now where O where can I get a purple X-Valve lol

Thanks all...