-
One (1) used ULE body ($75 + shipping):
Pics to come.
EDIT: Pics are here:
Most all that you see on the surface is fingerprints and smudges. There are no other scratches, dents, dings, blemishes in the finish, except that spot where the nickel flaked off in the first picture.
To the naked eye, it is in excellent condition (save for the aforementioned flaked spot), but nickel plate is very hard to take good pictures of, because the flash either washes the surface out, or shows every little thing on the surface.
It is in good shape though.
I also have two (2) LVL X bolt kits, with full carrier sets, all three springs, extra shims, extra orings, spare foamies, etc. One is in its box, with the CD, the other is not. I will include a regular sized CD with the instructions on it though, so you're only short the little plastic box.
Both are used, but in good shape. One power tube tip had the wrench flats slightly mangled by some ham-fisted fool before I got it, but it functions and installs without issue.
Price for either kit is $50 + shipping and insurance.
That does it for the new AGD parts.
But there is still more to come. . . .
Last edited by CoolHand; 08-28-2010 at 06:25 PM.
-
When NPS got bought out and became Kee Sports some years back, I bought all their Mag stuff (which was not a lot). Here's what I've got left from that:
Various Feednecks to fit ULE bodies (or Angels) ($15 ea + shipping).
(2) Black CCM's - Both SOLD
(2) Black AKA's - Both SOLD
(1) Raw AKA- SOLD
(1) Raw stock AGD
(2) Black NDZ (twist locking, oring grip)
(2) Silver NDZ (same)
32 Degrees Classic Mag Vertical Adapters ($5 ea + shipping).
(10) Black - Six (6) SOLD
(5) Silver
All include the required mounting screw.
RTP Bike Foregrips All SOLD.
(2) Brand New - Bare Both SOLD
(2) Brand New - With RTP VA Both SOLD
(1) Brand New - Blemished SOLD
This concludes the NPS refugees.
More stuff to come though . . . .
Last edited by CoolHand; 09-02-2010 at 01:00 AM.
-
I also found a couple of boxes of Logic parts that have long been discontinued, and that I thought I was totally out of.
Blue Ano'ed Second Generation UMF SOLD!:
Again, the ano sucks, and will probably need to be redone, but it is so thin that the reano shouldn't be a problem at all. Will come with trigger and safety installed.
Continued . . .
Last edited by CoolHand; 08-20-2010 at 03:31 PM.
-
Various Emag Triggers All SOLD:
(1) Blue Fireblade (will come with adjuster & magnet) - SOLD
(1) Black One of a Kind Prototype that I never produced - SOLD
(1) Raw First Gen Logic Blade - SOLD
(1) Stock AGD EMag Trigger (includes adjuster & magnets) - SOLD
Group of VMF V1.0 Triggers ($5 for all of them + shipping):
Two Used Rails ($15 ea + shipping) - RTP Rail SOLD:
(1) RTP rail used for e-frame testing. Cut inside for eye wire clearance. Unblemished on the outside. - SOLD
(1) Well used Classic Mag Rail
That concludes the random Logic Parts.
One more post to go . . . .
Last edited by CoolHand; 08-28-2010 at 06:26 PM.
-
Last up is the final remaining Automag in my collection.
Uber Classic Automag All Parts Now SOLD:
It has a classic valve, third gen UMF, SuperULE rail, stubby foregrip (which I think was actually made by Rogefactor ), Hogue grips, a ULE body with CCM clamping feed, a Shocktech drop, a super rare (and now unobtainable new ) Smart Parts On/Off ASA, and an even rarer and even much more harder to get Smart Parts first gen All American Barrel (which shoots quite well).
I will part this marker for the following prices:
Valve w/LVL7 Bolt - $75 (I still have the blank warranty card on this valve, it is nearly new.) - SOLD
SuperULE Rail - $75 - SOLD
Foregrip - $15 - SOLD
3rd Gen UMF - $75 - SOLD
ULE Body & Feed Neck - $75 - SOLD
Drop, ASA, Lines, Fittings, Etc - $15 - SOLD
Barrel - $15 - SOLD
That is all.
I accept PayPal, checks, and money orders, and I ship USPS Priority Mail.
The price of shipping is not included for anything listed in this sale.
Last edited by CoolHand; 09-02-2010 at 01:02 AM.
-
-
OMGwtfLOL RPG parts.....lolol
-
I'll take ;
I also have Two (2) brand new Slug Rails ($45 each + shipping):
Alpha Rail (use Classic Sear & VA).
(1) Good Finish + VA - $45 + shipping
PM me a total cost
thanks
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules