While I was buttoning up the whole UEF debacle, I managed to unearth a bunch of Mag stuff I had buried on the shelf, which I had forgotten about.
Here's the thread where someone buys all of it.
First off we've got the left over parts from the UEF project.
After the smoke cleared, I found that had seven (7) bolt-on kits left to sell.
Three (3) UEF Kits are SOLD.
Four (4) are still available.
They are unanodized, except for one, which was poorly anodized blue.
Love the blue color on that one, but the ano shop did a crap job on prep, so it'll need to be redone. At least they didn't polish it to death like some places do. Reano shouldn't be a problem because of that.
Price for each kit is $350 + shipping. They come totally unassembled and unanodized.
They come with all the hardware, screws, orings, pins, bearing, hose, etc, necessary to assemble the frame.
I'll even include a set of grips (your choice, red or blue).
The only thing you will need that I will not be supplying (because I'm out of them) is an LPR. Any autococker LPR with a 1/8" NPT mount will work.
The electronics are all included, and totally assembled, all you have to do is bolt them into the frame. No soldering required.
Pictars:
All of the following parts are brand new from AGD, never even drooled on before.
Two (2) brand new X-Valves with LVL X bolts Both SOLD!
Two (2) brand new EMag rails with rail bushings ($45 each + shipping) - One SOLD:
Continued . . .
Here's the thread where someone buys all of it.
First off we've got the left over parts from the UEF project.
After the smoke cleared, I found that had seven (7) bolt-on kits left to sell.
Three (3) UEF Kits are SOLD.
Four (4) are still available.
They are unanodized, except for one, which was poorly anodized blue.
Love the blue color on that one, but the ano shop did a crap job on prep, so it'll need to be redone. At least they didn't polish it to death like some places do. Reano shouldn't be a problem because of that.
Price for each kit is $350 + shipping. They come totally unassembled and unanodized.
They come with all the hardware, screws, orings, pins, bearing, hose, etc, necessary to assemble the frame.
I'll even include a set of grips (your choice, red or blue).
The only thing you will need that I will not be supplying (because I'm out of them) is an LPR. Any autococker LPR with a 1/8" NPT mount will work.
The electronics are all included, and totally assembled, all you have to do is bolt them into the frame. No soldering required.
Pictars:
All of the following parts are brand new from AGD, never even drooled on before.
Two (2) brand new X-Valves with LVL X bolts Both SOLD!
Two (2) brand new EMag rails with rail bushings ($45 each + shipping) - One SOLD:
Continued . . .
), Hogue grips, a ULE body with CCM clamping feed, a Shocktech drop, a super rare (and now unobtainable new 
) Smart Parts On/Off ASA, and an even rarer and even much more harder to get Smart Parts first gen All American Barrel (which shoots quite well).
Comment