CF Sleeved ULE Body Mods

[warpedmephisto]

I am no longer doing this modification. Thanks to everyone over the years for your support! I will revive this thread if/when I decide to do another run of these.

Finally I am ready to do another batch of this long-awaited modification. I have enough carbon fiber tube left to do about a dozen bodies. If there's significant interest beyond this number I may consider purchasing more tube and doing more bodies, but lets see how this pans out first.

Price for the modification is $50 including return boxed Priority shipping (insurance & delivery confirmation is extra).

For those not familiar with this mod, or seeking more information see this thread. At this time I cannot offer pump milling on a CF sleeved ULE body. For those interested in my quality of work, please see this thread.

Please PM me if you are interested in this mod and I will put you down on the list.

That is all! Thanks!

[Loguzzzzzz]

Is it correct to assume that we provide you with a ULE body and $50 and you send us the modified body and the CF tube?

. . . . .or did I miss something?

[Ando]

I wish I had a ULE body

[tbaggin]

top notch Mr Mephisto!

if I were building another mag (besides the one Loguzzzzz is workling on) id be all over it

[warpedmephisto]

Is it correct to assume that we provide you with a ULE body and $50 and you send us the modified body and the CF tube?

. . . . .or did I miss something?

Yes, that would be correct sir. Otherwise I'd be losing money, real fast.

[hill160881]

is this one? if so they are top notch work

[hill160881]

I am interested. This one is, on lone, and i MITE give it back. if i can get another one.

[rseb4agze]

I have a few questions:
-Can this mod be done on stand bodies like minimag, emag, etc?

-I have a ULE body but it's milled for pump can it still used for this mod and still be used for my pump set up?

[Mongoose]

And i just sold my last ULE body...

I have seen one of these in person...Awesome

[warpedmephisto]

I have a few questions:
-Can this mod be done on stand bodies like minimag, emag, etc?

-I have a ULE body but it's milled for pump can it still used for this mod and still be used for my pump set up?

This mod can only be performed on ULE bodies for now.

The body can still be used for this mod, HOWEVER I believe the CF tube would be too thin at the joint if it was pump milled. If the CF is too thin, it stands the chance of cracking and then the tube would spin freely on the breech, which is no good. Therefore, I would say that currently pump milling + CF sleeving is a no go.

So in short, I could mod the pump milled ULE body for CF sleeving, but that body would lose the pump functionality.

[zondo]

What happened to this design?



Are you still thinking about this, or is it shelved?

[koleah]

Damn, wish I hadn't painted over my only ULE body, or this would probably get done.

[Chronobreak]

hey andy, i got a body ready for ya!

lmk where to ship it, or if u want to meet up local somewhere

[zondo]

I will also have one for you as soon as BigEvil is finished with it.

[pbjunky99]

I want to have this done to my ule body also. Please pm me with your mailing address and your payment info. thx

[warpedmephisto]

zondo - Its not completely shelved, but I am going to hold off on tackling that project for the time being. Another possibility would be to mill existing ULE breeches to look as close as I can get to those. I'll have to toss that idea around and see if anyone would be interested.

pbjunky99 - PM'd you.

Scott - Probably the best bet would be just to send it to me.

[Chronobreak]

i will expect it back with a ule diet rail :P

pm'd

[DevilMan]

Hey WM!!!! How ya been man? Good to see you are back... does that mean we can settle up our deals??

Guys, you can do a search for my name as well as find the pics from the previous runs... And best of all April is not even close this time around!

DM

[hill160881]

so, DM, now that they will be available again you will sell me the one you loaned me, right?

[SSP-SheiK]

zondo - Its not completely shelved, but I am going to hold off on tackling that project for the time being. Another possibility would be to mill existing ULE breeches to look as close as I can get to those. I'll have to toss that idea around and see if anyone would be interested.

I'd be willing to offer a ULE as a guinea pig for that design..

[Chronobreak]

andy, i also got another ule on the way to me that il be shiping over. i will let you know when to expect it. you should have the first one by now(the exile ule body)

[motodrom16]

if it's possible to make on like this, see upper, i will take one!

[warpedmephisto]

DM - holy cow! Email me and I'll see if we can get things squared up finally.

Scott - Got the first body, send the other one whenever you want.

All - I am going to focus on doing just the sleeve mod to ULE bodies for now - the cosmetic milling will have to wait. Also, I will be out of town for the next week, so hang tight!

[SSP REAPER]

WM, I need your address so I can send in my ULE

[SSP-SheiK]

WM, I need your address so I can send in my ULE's

fix'd

[warpedmephisto]

I just knocked out the first CF ULE body yesterday. Have I got any other takers?

[Mime]

I'd say im quite intrested in this, PM sent your way.

[SSP-SheiK]

I just knocked out the first CF ULE body yesterday. Have I got any other takers?

waiting to hear from ssp- reaper, who is waiting to hear from you from what i understand...

[SSP REAPER]

waiting to hear from ssp- reaper, who is waiting to hear from you from what i understand...

I have the address and will forward it to you.

[Chronobreak]

should have the second body by now, and i have another rail to supply as well.

rail will be going out tomorrow most likely, i'm going to throw in the fore grip and frame i plan on using just incase