cutting the sear arm

[Flatliner333]

Red / Green / Gold... The "HydraMag"

[knownothingmags]

Red / Green / Gold... The "HydraMag"

kartas?

my fall back will be 3 aluminum minimag bodies and 3 shadow rails.

[knownothingmags]

should have mount prototype done tonight,

son got sick so things are up in the air on time frame.

[Chrome]

On feeding air to the triple stack idea, how about a standard valve on one side, reverse on the other, and a classic RT in the middle? Would allow you to feed the air through the rail in the middle?

. . . or you could do 3 classic RTs and go hoseless with a custom rail?

[luke]

What if you built a block to hold 3 AM/MM rails side by side. Have one long sear pin that ran through all 3 rails (you would have to cut the slots out of the middle rail). Have the 3 sears welded solid to the 1 long pin and cut the arms off the outer 2 sears. Like this

Any misalignment before and after welding would likely cause one or more of the bolts to not properly recock.

[river031403]

sear

welding causes warping which could cause some missalignments

[Ando]

JB Weld

[athomas]

The easiest would be to put 3 rams in place. They could be controlled by the same source so they would operate together but wouldn't require any alignment that might throw off the consistent operation of the gun.

[knownothingmags]

yeppers all of this has been figured out.
prototype is made and now all i need to do is go hang out with a drill press, and lose some weight on the prototype.

[BTAutoMag]

you said that without a picture... I think he needs to be punished

[knownothingmags]

you said that without a picture... I think he needs to be punished

workin on it let me lose some weight on this prototype.
once i get the prototype finalized and know if i can cad it out and have someone mill the final prototype out ill start posting stuff up.
slow but finaly doing somthing im talking about.

[BTAutoMag]

have someone mill the final prototype out

I do that kind of thing for a living... well cnc porting of engines and cnc vcalve jobs. I minght be able to help. depending on the tooling

[Flatliner333]

JB Weld

True Dat ....JB Weld is my friend.