CF Sleeved ULE Body Mods

**knownothingmags** · 05-11-2012, 01:22 PM

my stuff is finally ready two bodies. sent you a pm whenever you get a chance.

thankyou,
KNM

**my automag** · 05-12-2012, 11:46 AM

Soooooooooo....

You think you can do this mod to the NEW aluminium MM bodies Xmagterror is poppin out?

If so, can I send one in to you to get didered...done?

Thank you D.K.

**warpedmephisto** · 05-17-2012, 08:03 AM

Hi All!

I'm terribly sorry for being absent for the past month! For some reason I'm not getting notifications for updates to my threads or when I receive PM's. I think its time to update my email address on here!

At any rate, I went ahead and ordered another length of tubing, so I have plenty of sleeves to go around for whoever wants a CF modification. I am accepting all CF body work right now as well, so feel free to send your bodies in!

I've had a couple inquiries about XMT's new MM body and my CF modification. I will have to take a look at it and see what I can do. I will be back with a response shortly (promise!).

-Andy

**my automag** · 05-17-2012, 09:07 AM

Let me know how it goes with the MM body, sounds like about same specs as the ULE's so it shoud be no biggie...

Thank you, D.K.

**CanadianBlues** · 06-03-2012, 04:29 PM

PM'd you Mephisto!

**knownothingmags** · 06-03-2012, 06:00 PM

just to let ya know meph i sent my two bodies to you.

**warpedmephisto** · 07-25-2012, 10:11 PM

Just finished up with a large run of bodies a couple weeks back, and they all turned out great! I've got plenty of tube blanks left to do more conversions!

**bigandugly** · 08-14-2012, 09:25 AM

Originally Posted by warpedmephisto

I would have to take another look at a Tac-One body, but it may be possible.

Just curious, any news about doing this mod to a Tac-One body? I've got a vertical feed Tac-One body, and wouldn't mind a little more carbon fiber on my marker!

**river031403** · 08-21-2012, 04:51 PM

pm'd you on your ule rail milling

**Justus** · 10-12-2012, 11:31 AM

Sent you an email for a CF tube mod.

**dkv231** · 10-12-2012, 01:26 PM

Also interested in a body mod pming

**knownothingmags** · 10-12-2012, 04:01 PM

i need one too. please.

**my automag** · 10-13-2012, 03:55 AM

Ok, I might need one too... Just waiting on my MM's to arrive.

**addbot** · 10-14-2012, 12:09 AM

pm'd as well

**Justus** · 10-14-2012, 08:34 PM

Never got a reply to my email... seemingly started a storm on these though! lol! Should I send a PM instead?

**addbot** · 10-14-2012, 10:24 PM

Originally Posted by Justus

Never got a reply to my email... seemingly started a storm on these though! lol! Should I send a PM instead?

yes you did lol
sent meph a pm no reply yet

**warpedmephisto** · 10-18-2012, 08:06 PM

Hi All!

I'm terribly sorry for not keeping up with the PM's and messaging. I've been incredibly busy lately.

Good news is, I'm still doing the CF modifications and have plenty of prepared CF tubes in stock right now. Turn around time should be about a week from the time I receive the body until I ship it back out.

Thanks for your support, everyone!

-Andy

**TOTShadowCompany** · 10-18-2012, 11:21 PM

Sending 1 vert mod'd SS body out tomorrow.

**Justus** · 10-19-2012, 02:50 PM

Sending my warp-left body today. (Assuming that you're still at the Edwardsville address posted in your other thread.)

Thanks!

**knownothingmags** · 10-19-2012, 04:26 PM

whats the addres Warp?

i need to send mine in too.

**Justus** · 10-19-2012, 06:38 PM

I got my info here: https://automags.org/forums/showthread.php?t=225927

**knownothingmags** · 10-19-2012, 06:41 PM

is this still good address for him?

**Justus** · 10-19-2012, 06:47 PM

I sure hope so. It's where I sent my WL ULE body this afternoon. The PayPal address apparently works too.

**knownothingmags** · 10-19-2012, 07:43 PM

Originally Posted by Justus

I sure hope so. It's where I sent my WL ULE body this afternoon. The PayPal address apparently works too.

Hmmm,
hope he pops back on and confirms.

i may have 4 bodies to get this done to.

tripplemag HOOOOOOO +1

**BTAutoMag** · 10-19-2012, 07:51 PM

the most expensive automag ever

**Justus** · 10-19-2012, 10:44 PM

Originally Posted by knownothingmags

tripplemag HOOOOOOO +1

Nice. Original 1980's Thundercats reference.

**knownothingmags** · 10-20-2012, 11:09 AM

Originally Posted by Justus

Nice. Original 1980's Thundercats reference.

maybe ill get that lasered somewhere on the marker.

**need4reebs** · 10-20-2012, 07:06 PM

Originally Posted by knownothingmags

maybe ill get that lasered somewhere on the marker.

at least some thundercat grips...haha?

hey warp can we get a current address to send our parts to please?

**warpedmephisto** · 10-20-2012, 08:07 PM

Hey All,

My shipping address and PayPal information can be found here:

https://www.automags.org/forums/showthread.php?t=225927

I've got plenty of prepared CF sleeve ready so turn around time should be pretty snappy - around a week. Thanks for the support everyone!

-Andy

**knownothingmags** · 10-21-2012, 09:49 PM

awsome shipping one of my bodies out to ya tuesday.

Thread: CF Sleeved ULE Body Mods

Thread Tools

Display

ule rail milling

Posting Permissions