Vert Mod'd ULE WL/WR Body

[Justus]

But even if you attach the hopper in a manner in which it won't twist, how is the paint supposed to feed? It will be very unreliable, even if you use a force-feed.

Why wouldn't it feed just as well with the ball stack going down as it does with the ball stack going up? (Examples: 90* warpfeed adapter, 90* Qloader adapter) I get that it won't gravity feed well due to the possibility of having a flat spot in a 90* copper bend, but when using a parabolic powerfeed plug in a 90* warpfeed adapter, it should work just fine. Especially if using a forcefeed hopper.

[Chrome]

For what it is worth I emailed XMT a while back about milling a custom "classic feed" ULE body. He was buried under other projects at the time, but was not against working on the project. You may want to PM him regarding the same. I've been busy with other projects so I haven't followed up on it in a while.

[luke]

Why wouldn't it feed just as well with the ball stack going down as it does with the ball stack going up? (Examples: 90* warpfeed adapter, 90* Qloader adapter) I get that it won't gravity feed well due to the possibility of having a flat spot in a 90* copper bend, but when using a parabolic powerfeed plug in a 90* warpfeed adapter, it should work just fine. Especially if using a forcefeed hopper.

Just read he picked up a warp adapter, that might work. My comment is on the copper elbow.

[Justus]

Just read he picked up a warp adapter, that might work. My comment is on the copper elbow.

Yeah, and I agree with that.

[Kusokow]

so you looking to something ken did but with clamping neck on it???

http://www.mcarterbrown.com/forums/m...ml#post2622909


how hard would it to mod a warp ule body to fit one of these?

http://www.ebay.com/itm/SPYDER-MR-MR...item4170545ade


or this?

http://www.ebay.com/itm/Techt-METAL-...item5aed2b7585

Yeah, Ken's marker is what i had in mind.

[Kusokow]

Why wouldn't it feed just as well with the ball stack going down as it does with the ball stack going up? (Examples: 90* warpfeed adapter, 90* Qloader adapter) I get that it won't gravity feed well due to the possibility of having a flat spot in a 90* copper bend, but when using a parabolic powerfeed plug in a 90* warpfeed adapter, it should work just fine. Especially if using a forcefeed hopper.

Yeah, I dont see it working with a gravity feed very well. I was going to mount a force feed hopper on it,

[need4reebs]

heres is another option:

http://www.automags.org/forums/showthread.php?258709-Yo-dawg-i-herd-u-lieked-shooting-mags&p=2778803#post2778803

it will offset the hopper

depending on what hopper you were to use with the lapco feed neck and ptp warp adapter chances are the hopper will rotate forward or backwards while running and gunning? risk dumping or breaking the hopper?

[esperto96]

I used an old Ricochet Apache loader on a warp left ULE body with a parabolic warp feed adapter, a few times. It fed reliably enough unless the paint was low but I couldn't stand it. It felt like the hopper was blocking my vision too much and weighed the gun too much to the left to be comfortable.

A good force feed hopper will make any bends or horizontal feed zones irrelevant for the most part. Like the others said, though, you might need to brace the adapter if it twists too easily. Mine rotated when full of paint and if jarred too much. That was another reason I abandoned that particular set up for something more traditional.

[OPBN]

Have you considered a Warpless mod? I'm not a huge fan of the Warp, but the WarpLESS seemed intriguing.