Where do I find black airline fittings?

[Levi]

Hi there, first post but I've been an occasional lurker here over the years.

I have a new Mag on the way to me and I'm looking for airline fittings to plumb it up. I have plenty of the standard nickel plated elbows kicking around, but this mag is all dust black and I don't want to put anything shiny on it.

I've been searching and googleing and all I've come up with so far is some 1/8npt fittings from auto racing parts companies.

I know I've seen black elbows on several Mags on the forum... so where are you guys getting them?

-Levi

[Flatliner333]

Ebay has gloss Black ones , I have never seen any dust Black though.

[tricky]

Here you go.

http://item.mobileweb.ebay.com/viewitem?itemId=281078426952&index=0&nav=SEARCH&nid=86785902751

http://item.mobileweb.ebay.com/viewitem?itemId=281078792755&index=12&nav=SEARCH&nid=17863869790

[OPBN]

Ninja and Macroline Guy used to both sell them. They are just powdercoated if I'm not mistaken and scratch/wear pretty easily. The CCM ones are nice because you can get them in dust or gloss black. Pricey though.

Quick google search brought up a few options. Google "black swivel macro".

[keiko_819]

Yeah...ccm fittings always give a final touch to any marker...tons of colors also

[bbotts77]

Ninja and Macroline Guy used to both sell them. They are just powdercoated if I'm not mistaken and scratch/wear pretty easily.

I've had both Ninja and Macroline Guy fittings. The paint on the Macroline Guy fittings chips and smashes pretty easily. Ninja uses what I think is called black oxide. I think the Ninja fitting end up looking better after you put them on because tool marks don't show up as much on them.

I would also recommend looking into the CCM fittings. They are very nice.

[Levi]

Thanks guys!

Those CCM fittings sure are sexy... I'll probably end up going with those for this marker.

I have a couple of classics that I'm thinking of giving the black shrink tube over braided stainless treatment. Who makes black 1/8npt elbows for this kind of setup?

[bbotts77]

Who makes black 1/8npt elbows for this kind of setup?

You can find those at a few different places. I got a couple from Ninja about a year go.

[Levi]

You can find those at a few different places. I got a couple from Ninja about a year go.

I guess I'll have to give them a call, I didn't see them in their catalog.

Thanks

[Justus]

The CCM fittings are the nicest and most durable. First, there's no reason to ever put a tool on the black part. Second, the black part is anodized aluminum.

[OPBN]

Thanks guys!

Those CCM fittings sure are sexy... I'll probably end up going with those for this marker.

I have a couple of classics that I'm thinking of giving the black shrink tube over braided stainless treatment. Who makes black 1/8npt elbows for this kind of setup?

Steer clear of the swivel aluminum fittings. They so not seem to like high pressure. Once had a marker that I set up with these. Aired it up and 3/4 leaked like crazy. Literally blew the rubber seals out.

[Me�iCX]

Ninja no longer carries black macroline fittings.

[Levi]

You can find those at a few different places. I got a couple from Ninja about a year go.

I emailed Ninja this morning. The closest they have to a black elbow is grey. Hmm... I could get them annoed but that seems like a lot of trouble to go to for an elbow.