Center feed minimag body-need help

[Zeropjc]

So I have a minimag cf body but I noticed there's not a small pin in the body to accept a mag twist and lock barrel is this correct? Or is this a lost cause

[warchild69]

The pin sits in your rail, not the body

[knownothingmags]

throw a pic up of what you are talking aboutl

[Zeropjc]

Oh gotcha thanks a lot man it's been a while haha

The pin sits in your rail, not the body

[brokeass_baller]

I demand pictarz!

[Spider-TW]

You can buy a new twist lock pin from Tuna, AGD, or the BSTs.

The previous owner probably took it out because they wanted to use a non-cf barrel in it, friction fitting it somehow. Center feed barrels are harder to find.

You can also use a Doc's Adapter with your new twistlock pin, if you don't have a cf barrel you like.

[TwilightG]

Just for clarification, are you using an original stainless center-feed MiniMag body w/ the smoke-stack feed or one of the newer aluminum bodies that XMT created? The newer bodies are AC threaded.

Sorry if this was obvious, just couldn't tell from the original post

[Zeropjc]

Wow thanks for all the help guys it's been a while since I put a mag together and it's the original body for a cf minimag with the high rise center, I plan on sending it out to shorten it down an possibly change the cloro to black or white.

[Frizzle Fry]

it's the original body for a cf minimag with the high rise center, I plan on sending it out to shorten it down

Please do not do this.

[Zeropjc]

Is this not a good idea? What would be wrong

[El Zilcho]

Is this not a good idea? What would be wrong

They are rare and are worth a decent amount when they are not cut.

See post #3

http://www.automags.org/forums/showthread.php?264645-I-m-getting-out-Selling-off-the-rest-of-my-stuff!

[need4reebs]

i still have the center feed Diggers barrel if you wanna get it?

the feed neck is a high rise but has a after market clamping feed neck not the original basket like the body in tha thread emcl29 posted up? so it has been molested just a lil...not fully cut yet..haha? here are a couple of pics: