*Official Automag Pictures*

[BTAutoMag]

I like it as is, besides most of it is steel and youd only be able to ano the drop, rail and foregrip

cudos on the reverse valve

[nak81783]

Here is my TKO Automag Classic, pretty much as purchased from ActionVillage.com in Winter of 2001. I upgraded the Smart Parts Progressive barrel in the package for a Smart Parts All American. I still remember what a hassle the barrel upgrade turned out to be, but they let me keep the Smart Parts Progressive barrel they sent by mistake for free. I removed the duckbill ASA and lower macroline for the drop, on/off, and stainless hose as pictured. The picture is a scan of a photo taken with a disposable film camera. Remember those? Man, I'm getting old.



Here is the same Automag upgraded. It has pretty much been in this form since Winter of 2004, except I've switched from a ULT to a standard RT on/off, and the drop and on/off have changed to what is pictured. The only things not upgraded or changed are the rail, vertical ASA, and foregrip.



Finally, after 10 years of wanting and waiting, here is my X-Mag I purchased in May of 2013. I simply added XMOD Beta 1.8, the drop, and the on/off. It was well worth the wait.




-Nathan

[rukh013]

BIG thanks to Tunaman and keiko_819

got a vid too

[nak81783]

Nice! It's my European counterpart.


-Nathan

[Justus]

Wait, sleeper? What do you mean by that? That's usually a term used when the trigger is pneumatic and the LPR is hidden within the frame.

[GRimm]

Some action pics with the X

[swe_crazy]

Finally found a trigger frame. A tank in the same ano would be nice...

[GremlinX401]

[Billz804]

You bastard!

[Mr. Red]

nice

[cockerpunk]

[Sockpuppet]

These are my two babies. The top one is mine, the Red and gold is my Girlfriends. Lvl 10 in both. RT On/off in the top valve for just a little lighter trigger pull.

[capt spank]

my first mag that i'm proud to show

[astr0xz0mbie]

i love the red and gold minimag sockpuppet would look sick with a red xvalve

[maverick13]

@ Capt spank : Very nice mag.

[magman313]

finished my minimag

[Jkoselka]

Just mine.... First picture post on AO

Lukes mini double trigger vert frame
Lukes milled rail
Deadlywind foregrip
X-valve
ULE body custom milled by me
Empire feedneck, with adaptor (made from the ugly stock feedcup)
Bob Long ASA
Black out anodizing by Caustic Customs

[Bigface]

My Minimag

[robertreed711]

[Stedspitcher]

very nice Rob, very nice dropkick!

[robertreed711]

very nice Rob, very nice dropkick!

Haha, thanks again man! I should also say thanks to Reebs for that sweet Shorty barrel.

[bowcycle]

Here's the family pic


And my Z-mag, of which I am quite proud

[Tryfan]

After 93 pages mine doesn't really compare, but here it is:



For good measure, my other one:

[egalsim]

[Syko89]

Pump project moving along

[MK3]

Just pulled the wife's Xmag out of the closet. Thought you guys might like some pics

[NU_METAL]

Nice X ! I'm diggin the way that green changes its hue with light .it may just be the pic ,but i still like it
I didn't realize till just now that AGD made a NON-ule grip frame for the X-mag ,that also housed the EYE and side adjustment screw
all these years and im just seeing this now ? lol
im wondering if this was some sort of early limited run ?

[MK3]

Nice X ! I'm diggin the way that green changes its hue with light .it may just be the pic ,but i still like it
I didn't realize till just now that AGD made a NON-ule grip frame for the X-mag ,that also housed the EYE and side adjustment screw
all these years and im just seeing this now ? lol
im wondering if this was some sort of early limited run ?

It's a fade anno job, dark green to light green then back to dark green I dont think it was an early run, it's SN is XT00129. I think they made 500 of them total. It may have been a limited model but I have to idea...

[NU_METAL]

I got to give you credit ,this is the first ive seen anyone do the Halo mod with a pump
What board did you decide to go with in that hopper shell ? I'm assuming you went with the sound activated Halo B board ?
Im trying to decide what to do with my mod ,which is very similar

Pump project moving along

[Syko89]

Halo too board and tamiya high torque motor