Stats in magasine showing, the autmag IS gaining popularity, look

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • angelKiller16
    Mid/Frnt playa
    • Aug 2002
    • 118

    #1

    Stats in magasine showing, the autmag IS gaining popularity, look

    I took a trip to my local periodical store and picked up 3 paintball mags (cost me 15$!!!!!!) and as i was reading one on the ride home i saw this very interesting statistic. What do you think is the most popular gun, if you guessed the autococker, well you guessed right, 21% of people use the autococker. i'll list the guns and thier % below

    autococker 21%
    spyder 20%
    tipmann 18%
    Angel 9%
    Excaliber 7% (ok i don't know anyone who uses one)
    Automag 4%
    Shocker 3%
    Brass Eagle 3%
    Pump gun 3%
    Matrix 2%
    Impulse 2%
    who cares 1%

    Now I think that these results are a bit scewed, but if you only keep tournament guns it would read in order Autococker, Angel, Excalibur (?), Automag, Shocker, Matrix, Impulse. I personally don't know anyone who uses a Excalibur, and i've only seen them in trade show pig tv videos so i have know clue how that got so high. Other then that i thought the mag did pretty well, especially if you take out the spyder, tipmann, BE, and pumpgun. Well just wanted to pass this info along.
    Cited from: Paintball2Xtremes, September, 2002, pg 20
    Minimag body, valve: CF05240, gas-thru grip, all-american, lvl 10, tourney velocity adj., flatline 68/3000 nitro FL01255
    SOON: intelliframe/medusa

    custom spyder, with every part replaced but they valve and body.
  • Blennidae
    an epileptic hummingbird
    • Nov 2001
    • 1920

    #2
    No intimidators?

    I have also not seen an Excalibur on the field. I have seen a lot of timmys.

    Comment

    • CpSuPeRkId
      Registered User
      • May 2002
      • 390

      #3
      stupid cockers at the top of the list. MAGS AND IMPULSES SHOULD BOTH BE UP THERE!!!!!!
      My Trader Feedback

      *AKA factory certified tech
      AIM: TonyG749
      EMAIL: [email protected]

      Comment

      • wimag
        BEZERKERS
        • Aug 2001
        • 1334

        #4
        seen quite a few Excaliburs. very very nice piece of equipment. featherweight. watch the % grow overtime, that gun will take off. plus it shoots like a dream for an electro.
        BEZERKERS
        ALL MAG SHOOTING TEAM

        Comment

        • AcemanPB
          Exactly
          • Mar 2002
          • 1885

          #5
          yeah this one guy has an excal at my field, they are pretty nice i'm not to sure about them though (closed bolt right?)

          Comment

          • angelKiller16
            Mid/Frnt playa
            • Aug 2002
            • 118

            #6
            yah excals are closed bolt ULTRA low pressure electros
            Minimag body, valve: CF05240, gas-thru grip, all-american, lvl 10, tourney velocity adj., flatline 68/3000 nitro FL01255
            SOON: intelliframe/medusa

            custom spyder, with every part replaced but they valve and body.

            Comment

            • AcemanPB
              Exactly
              • Mar 2002
              • 1885

              #7
              well i wonder why they haven't caught on, cause it seems like ultra low preasure/closed bolt is all what most people care about today, i guess for that increased range and accuracy

              Comment

              • rjvemt1
                NITRO-BURNIN' HYPER-MAG
                • Mar 2002
                • 681

                #8
                did anyone else notice that those numbers only add up to 93%?

                Comment

                • angelKiller16
                  Mid/Frnt playa
                  • Aug 2002
                  • 118

                  #9
                  what the hell!, yes you are correct! i have tripple checked those numbers and they are exactly as i read them in pb2xtremes. you can pick up one yourself and check pg 20 if you like. It's ok though we can just add the extra % to the automag collum.
                  Minimag body, valve: CF05240, gas-thru grip, all-american, lvl 10, tourney velocity adj., flatline 68/3000 nitro FL01255
                  SOON: intelliframe/medusa

                  custom spyder, with every part replaced but they valve and body.

                  Comment

                  • temps
                    starcraft?
                    • Aug 2002
                    • 546

                    #10
                    Margin of error, that is to be expected... Although 7% error... Thats alot, the 7% probably goes to the E-mag that they must have forgoten the print

                    *The New List*
                    autococker 21%
                    spyder 20%
                    tipmann 18%
                    Angel 9%
                    Excaliber 7%
                    E-Mag 7%
                    Automag 4% (Add the AGD guns and we have more then angels hehe)
                    Shocker 3%
                    Brass Eagle 3%
                    Pump gun 3%
                    Matrix 2%
                    Impulse 2%
                    who cares 1%

                    Comment

                    • hitmanng
                      Slayer of Sacred Cows
                      • Jan 2001
                      • 1237

                      #11
                      The Excaliber is made right here in Indiana in Fort Wayne. We see a lot of them around here and people like them. They are very similiar to an Angel in Mechanics is my understanding and the company comes to Tourneys and makes sure the customer service is still there. If the E-mag wasn't there it would be my next marker for sure.
                      Hitmanng

                      Comment

                      • BTAutoMag
                        AO's Problem Child
                        • Oct 2001
                        • 7199

                        #12
                        well at least we're one up on brass eagle
                        sigpic

                        Comment

                        • persistent
                          Registered User
                          • Jul 2002
                          • 51

                          #13
                          excal

                          I'm not trying to be smart but the excals and vikings are made in indianapolis. if you play in the icc you'll see a million of them. i've used my excal for a year now and no breaks in the breech or the barrel. on a side note i sold my level 7 back in 95 and thanks to the extreme guess whos comin back to agd (already preordered)
                          oh yeah, anyone needing help with an aka product let me know i'm a certified tech
                          AKA Tech
                          Air Force Won
                          AIM thejodus

                          Comment

                          • freek133
                            Because I can
                            • Dec 2001
                            • 366

                            #14
                            angelkiller16

                            did you by chance buy the september issue of paintball 2 xtremes, with Trauma on the front cover? That list sounds familiar,
                            baaaaamm, yo i can hang!!!
                            2K3 TADAO *ACED* MATRIX FOR SALE $900! W/ PLENTY OF UPS!

                            Comment

                            • angelKiller16
                              Mid/Frnt playa
                              • Aug 2002
                              • 118

                              #15
                              Yah, thats the one i bought, TRAUMA is awsome!, what 4 NPPL wins, thats amazing. Oh and buy the way everyone pick up the lastest isue of Paintball Games International, my boys ESP ECLIPSE are on the front cover! (well one of them) I go to thier shop (Dartmouth, Mass), have played at the feild with some of them, and know the captain and owner of the place on a first name basis (Marcio). My friends have jobs at the feild too. If your every in the Mass area thier are three shops and a feild. The biggest shop is Dartmouth on rt 5, the other is in Swansea near the mall and the other is in Lakeville, and the feild is right by the dartmouth shop about 2 1/2 miles away behind a wine vinyard just off of rt5. ESP is the best feild/Shop in mass, no-one else! Pick up the latest PGI!
                              Minimag body, valve: CF05240, gas-thru grip, all-american, lvl 10, tourney velocity adj., flatline 68/3000 nitro FL01255
                              SOON: intelliframe/medusa

                              custom spyder, with every part replaced but they valve and body.

                              Comment

                              Working...