ALL about the WARP-FEED

[Havoc_online]

ShooterJM
Ifeed the revy if you outshoot it. Both if you worry about batteries for the warp. Ifeeding the warp doesnt really speed it up cause for the life of me I can't outshoot it just using the vib sensor. However, outshooting the revy always happened with me till I started using the HALO on the warp.(Ifeed the warp if you run into LX recoil issues(I never have but hear about it alot))

surfer349
It's called a 12v Regulator. The Radio Shack may of been out of stock but they do carry it. Building the set-up isnt the easiest thing to do if your not used to soldering and such. You could PM me if you would like me to build ya one.

[AlabamaMan]

Warps are the bomb

Warps rock i used one on my tippmann for a while, i was borrowing it from BlackVCG. But then he went and put it on his E-Mag. There is nothing like shooting the tippman with a flatline barrel upside down. Talk about crazy-ness. A tippmann has no problem useing the vib sensor. I just can't wait till i can afford one for my new RT-Pro.

[ES13Raven]

Besides the 12v mod,

What mods have people done, and do any actually improve feeding?

[Havoc_online]

Warps are the bomb

now there is a guy who knows what he's talking about

Raven, with the warp, everything is pretty much options. How you want to mount it. What you want to activate it. Are you having trouble with your warp feeding? the 12v mod isnt really needed unless you are pulling over 16BPS(I doubt it, unless it's a non-legal triggerpull) inwhich case you would also need a HALO to keep up.

[minion450]

Yeah i love my warp best ebay buy i ever made :) You keep saying to use a halo. Do you know how the new Evolutions are.

[Havoc_online]

cheaper. But also slower. and FREAK'N UGLY(imho:))

[minion450]

Yeah the looks kinda had me going. I thought they were faster though. oh well a halo is my next perchase when my rt pro comes in

[ES13Raven]

Originally posted by Havoc_online
Raven, with the warp, everything is pretty much options. How you want to mount it. What you want to activate it. Are you having trouble with your warp feeding? the 12v mod isnt really needed unless you are pulling over 16BPS(I doubt it, unless it's a non-legal triggerpull) inwhich case you would also need a HALO to keep up.

Well.... I plan on getting one for my Dark FreeFlow Racegun. I'm kinda doing it as a project, and I want to see how fast I can get it to go. I already have a 12v TurboRev and a Ricochet, so I don't want another hopper.

I don't know if you have seen it yet, but The Racegun guys have a Raced FF Cocker doing 20bps with a modified Halo B: http://www.raceguns.dk/data/RGP_320x256.avi (4,7meg lo-res)
http://www.raceguns.dk/data/RGP_512x409.avi (10,8meg med-res)

[Havoc_online]

the only thing that's going to feed 20 is a halo B, the turborev and rico wont go over 15 on a good day. the egg I heard pushes around 17.

a 12v warp will do 24 but is only as fast as the hopper loading it in long strings.

[minion450]

What about Rechargable batteries. would you go NiMh NiCd or lithium ion batteries. I would hate to spend the money on a bunch of 9 volts and a charger to find out they don't work well with basic mechines. I know i tried using ultras in a little motor car and it killed it in minutes where a regular alkiline lasted much much longer. so if anyone knows anything that would be great.

[Havoc_online]

I personally dont use rechargables but always hear about Plainviews being the only ones worth it since they are NIMH and are rated for a higher mah.

batteries

and this charger to charge them.

charger

[AlabamaMan]

Plainview's Rock

Plainviews are great rechargeable batteries, I use em. I use a regular energizer battery charger too. Like the one you can get at any store it can charge 2 9V or 4 AA or AAA batteries. Works great

[pballguy17]

hey, i got a prob with my warp. first it's used, so it may ove ben thrown off of a building for all i kno, but the guys was really kewl, and i doubt anything was ERALLY done to it.

My warp doesn't always spin when i fire the gun. My sensitivity (the blue tower like thing that spins) is set literlly milemeter's from where the warp spins on it's own, and than stops. but it still doesn't spin when i fire the gun. sometimes it does, sometimes it doesn't, if i tap the side of the warp, it takes a descent wack to get it to spin. NOW after i got it, and i put batteries in, i closed the door and it was really tight, so i tried to open it again, and it was SUPER tight (the door). i finally got it open, and it split the wires, they got cut in the door!. lucky my friend had extra wires that we sodered onto the old ones, and got it working again. but in that process, we open the entire warpfeed, and put everything back togther peice by peice. also the scrwes on the board are stripped, and don't spin out =\. thanx for any help, it'd b nice if u PMED with help, as well as posting for anyone else who might have the same prob

[Havoc_online]

it's possible that since the board screws are stripped, that the board isnt sitting where it should so the springs that make contact are not doing so properly. Since I dont have the warp, I can't tell ya for sure.

check your PM.

[ES13Raven]

I thought this should go in here too! :)

Originally posted by RobAGD


I think this is self explanatory.

If your not getting it right you need to play with the adapter hight to get the stack correct.

This is the biggest problem I have seen to date for feed problems with Warps.

-Robert