today, Temp was Mid-low 40, shooting very brittle proball.
I can't complain, I didn't CHOP a single ball!!
First LV10 set up is as follows
Carrier 2, with broken in 2.5 o-ring
3 shems
Med Springs
When I first gased up and clocked in, great... 291,290,292,291,290
after first game (600 rounds)
a small leak from the barrel. I de-gassed it, and let it sit.
Next game...
Shot great, end of the game (400 rounds) started to vent heavier from barrel.
I de-gassed it.
next game...
Venting Heavy down the barrel, 300 rounds and the bolt STOPPED firing. *bolt stick*
I changed the LX10 set up to
1.5 carrier, 2.5 broken in o-ring
2 shems
Med Spring
gassed up, fine for 300 shots, then a heavy vent from the barrel.
I changed the LX10 set up to
1 carrier, 2.5 broken in o-ring
2 shems
med spring
worked fine for 200 shots, then HEAVY venting from barrel
I changed LX set up to
.5 carrier, 2.5 broken in o-ring
*different o-ring inside the carrier*
2 shems
small spring
no more leaks... and was fine on paint for the most part (shot 600 rounds)
then a slight leak from the barrel!!!
ok, that's where I'm at... the danged thing leaking from the barrel...
wanna take a stab and try to help...