Originally Posted by
cougar20th
That hole is slightly off center. I do not know if that is intentional or just how this one was drilled.
It isn't supposed to be off center. The Pro Team bodies use regular AM/MM classic sears. When these bodies are used on emag lowers, you need to machine the emag sear so that it has the same dimensions as the classic sear in order for it to fit in the body. The bushing needs to be machined flush with the side of the sear and the hole needs to be drilled out to the same size, but the pivot point remains the same.
Except for the Automag in front, its usually the man behind the equipment that counts.