Here it is, PhishMag version 2.0 + the coveted STEP-BY-STEP guide:

PLEASE NOTE that the step-by-step guide is 30mb, so if you got a slow connection, be prepared to wait. When opening it, give your computer some time to load it too. I did my best, I hope it helps all of you

Pneumatic Trigger Frame - Step By Step guide <----right click and select "Save Target As"

Alternate sites:
http://axeman.zapto.org/phishhowto.doc <-------do same as above ^

Smaller Versions of the Pneumatic Trigger Frame - Step By Step guide MUCH THANKS TO GHOST068
How To... - 221kb PDF Version <-------do same as above ^
How To... - 1.5mb DOC Version <-------do same as above ^

Specs of the gun:
RPG Chimera Frame
X-valve w/ ULT
Palmers Micro Rock
Fabco MSV-1
Clippard MPA-3
various fittings and braided hose

Here are some pictures of the internals of v2.0

Pneumatic Frame 1

Pneumatic Frame 2

This version is intended to be a "bolt-on" frame
videos will be posted after i goto the field

Much thanks to Duck Hunt for hosting this guide

looks like an awesome, compact mod, maybe i should buy myself a mag and do this over the summer

nice one phish!

however, the inage links are broken in the top post

It wouldn't surprise me if the server is too busy. Those are some huge bmp's. Convert them to jpg and it should be a lot easier on the server.

Oh, nice work phis. Very neat looking!

PHISH!
You are a god! Thanks for all the hard work on this project. This is awsome!

and when is someone going to put together a package for us poof unfortunate souls who live elsewhere in the world, so that we may be able to make this mod?

talking about 6" of tubing, the screws, mounting set screws and the minimatics, oh and the nail

I sware, living in the UK sucks....

Patience Grasshopper.

the how to link is dead. just to let you know

Its Alive on my end, at my work computer too...

Sean

link works for me too....it's a big file and if to many people hit it up at once, it might seem like its dead.....just try again later

Hey phishphen nice job!!!!!!! How do you like the MSV-1 that far down on the trigger????

Looks great phishphen!

I gotta get some free time to tinker again

ok, this is an important question everyone........to me, i think the MSV-1 is just a little to far down the trigger.....mainly cuz its a little heavier on the pull, but the pull length is VERY short. it is definetly 1mm or even less.....i can still walk it (maybe even a little faster) like the videos in my first thread, it just takes a little time to learn the trigger. in the step-by-step guide, i make mention of this and an alternative way to bring the msv-1 up the trigger a little more. better yet, if you do what Wassupstranger did in his mod, that would be the best AND you have more room for the LPR.....

Maybe its just me, but the how to link says that the location does not exist.

Here are the two pics in the above links, if anyone cannot see them.



Thanks to ImageShack for Free Image Hosting

does anyone have an idea if this mod would fit into an intelliframe?

from what I can tell, the minimatics will fit fine (because you will be using the inteliswitch mount) and the rest of the frame is IDENTICAL to the rogue one - all made to AGD spces

fitting the LPR though will have to be done on the front grip or on the ASA or Valve

but yes, totally do-able

now Luke! Hurry up and get these mod packs put together! I'm itching to have a go!

Bandwidth exceeded! Anyone else wanna host it feel free to! Just give Phish credit!

Sean

http://axeman.zapto.org/phishhowto.doc

right click and save as....

it WILL be slow...
but hey, it's a free host for a lot of work from a great guy!

Duck Hunt: sorry that my file exceeded your bandwidth.........
undescriptive: Thanks for hosting it...


If anyone else can Host this file, i would appreciate it. Just do what undescriptive did....thanks!

Just so you know, Luke is on my list of heros, near the top.

Hey,
I cleaned up the "phishhowto.doc" and converted all of the pictures to jpegs. This makes the file SOOOO much smaller. I've got it down to a little over 1MB!! The quality decrease of the pictures is almost imposible to notice. If someone would like to host it, I would be glad to send it to you.

~ghost068~
~ghost098@gmail.com~

nice job man. one question, why did you relocate the outlet on the actuator? it only takes a teeny bit of dremeling to get the QEV in there were it is normaly.....

ghost.....send it to phishphen@hotmail.com and i'll put it on my site....THANKS!!!!


txaggie: im confused....can you explain a little more?

Phish, VERY NICE!!!! I have a Y-Frame aching for this mod... Luke, two words {chant}MOD PACKS!!!{/chant} i'm curious if my Y-Grip will have more room than an Intelli.... Also, is anyone offering this mod as a service?? I'd pay to have this done.

-Cold

luke and phisphen are now my two heros of AO. Besides RogueFactor Coolhand and TK of course

If someone wants to send me the new "smaller" file, I'll host it as well....
it won't be quite so slow then

undescriptive - at - hotmail - dot - com

Whenever someone (luke or similar) makes the chimera frame with all the necessary grinds, and just gives you some parts to shove in I'm doing this...(I am without any tools,...And using kitchen knives might take a while to do these things....)

so its now 10 megs just need someone to host it
hope it helps

save some bandwidth

phish, undescriptive: ill send the file this afternoon.

I was thinking, insted of choping the crap out of your frame, couldn't you just use a longer drill bit? Drill right through the trigger guard then into the frame body? The bit might be too fragile for anyone to make it that long, I dont know, just a thought.