Ninja Regs = Awesome For Mags. Myth Regs = Chuff Chuff Chuff

[going_home]

So a few months ago I got a Myth reg that was supposed to
come with 850 PSI output for Automags:

http://www.automags.org/forums/showthread.php?t=246888

At the time I bought it I didnt have a mag, not until just lately.
Thats when I found it it was under 700 PSI output.
The seller tells me to call Gorilla Air and send it back.
I called them and they said they never have sent out any regs
specifically for Automags (in other words I got a standard 650 PSI output reg).
So I spent money to send it to Gorilla Air.
Got it back the other day and its still wont work on the mag.
Its putting out about 750 PSI.

So I didnt get what I paid for, and then I paid more, and still cant use the reg.

So I picked up a new Ninja reg on Ebay from Ebay seller mesapaintballsupply .
I told them about the Myth and that I needed a reg for use on Automags.
They hooked me up 4500 Ninja with right at 950 PSI output.
$35.00 shipped.

Very happy with the HP Ninja reg.

I am adding the seller ( BenoitOWN ), Myth Regs, and Gorilla Air, to the
"never buy from again" list (ANS Gear was the lone assassin until now).

So mag enthusiasts, forget Myths and get a Ninja.

[BigEvil]

Dont knock Benoitown ... anyhow.. its not all about the input pressure... it's also about recharge. I run all of my Emags on a 700 psi output Dynaflow, you would think I had 1200 going in. Yet, my Centerflag 420 which was set at 950 psi chuff badly. Go figure.

Glad the Ninjas are working out. No one has really had anything to say on them yet.

[Newt]

No one has really had anything to say on them yet.

??!!

Assuming you mean that no one has really had anything BAD to say on them yet, yes. Automaggots everywhere are raving about the Ninja reg.

[Beemer]

Whaaaaaaaat

We tested that myth reg on that M90 frame that TK used at LLs and it worked just fine.

Dont know what the out put was but it worked fine on the M90 pneu frame with TK on the trig and he knows how to shoot.

You dont need 900psi in. High pressure over 800psi in on a Mag is over rated.

[BigEvil]

??!!

Assuming you mean that no one has really had anything BAD to say on them yet, yes. Automaggots everywhere are raving about the Ninja reg.

Yeah, i guess I am not paying too much attention these days. :) Damn old age.

[Beemer]

Oh ya

note to self...........See if Ninga will get us some product for testing with the Shoebox.

We have beat the crap out of the Myth with filling and dumping and filling and moisture testing and it keeps ticking with out a rebuild yet.

Dump 70/4500psi out the reg straight away and see how it holds up. Recharge is another thing but like I said it worked on a M90pneu with TK on the trig.

[Frizzle Fry]

I am adding the seller ( BenoitOWN ), Myth Regs, and Gorilla Air, to the
"never buy from again" list (ANS Gear was the lone assassin until now).

That's a good idea. I've had a lot of trouble with ANS Gear as many know, and I've heard of and witnessed several of ripoffs from that member you've mentioned...

[tribalman]

ah crap.. i recently got a myth 2 because my regular screw in tank/reg is out of hydro and last time it took over a month to get back(going next weekend to play). i haven't tried it with my tac one yet. my emag has an adjustable armageddon on it so i don't have to worry about that. i'll see what happens in a day or so when i have time.


i agree with ANS. website said they had a pump kit in stock for a trilogy cocker. i asked to verify; they said yes in stock. ordered right then. month later canceled because they were backordered wouldn't be in for 2 months and i needed it in 2 weeks(from cancel date, was over 1 1/2 months at order date). took another few weeks to get $$ back.

[Hobbez]

I have 2 tanks with myth regs on them and they work perfect on our mags. Used them for almost a year before we retired them to back up status and got us new tanks from crossfire. Only complaint I can evan remotely think of is that they are so dam short that they are hard to use with a drop.

[cockerpunk]

i think the conclusion is much more sweeping:

ninja = win
GA = lose

the ninjas are more consistent, easier to work on, parts kit is great, adjustable output, plus you have ray, who is the man, plus its made in the USA, competative pricing ...

rarily do me or bryce endorse a single product over any other. typically poeple will ask "what small bore barrel is the best?" and we don't really have a good answer for that. i mean there are lots of great small bore barrels out there. but when poeple ask about compressed air tanks and regulators, i have one answer: NINJA!

http://www.youtube.com/watch?v=Bj8ScksTLMI

http://www.youtube.com/watch?v=kQO961yTIWo&annotation_id=annotation_313149&feature=iv

http://www.youtube.com/watch?v=Xn4X387b85A&feature=related

http://spreadsheets.google.com/pub?key=tNzULgiZMiWwbd7paRrEWSQ&output=html

60 psi creep over 5 mintues, 340 psi swing over 2500 psi? NO THANK YOU.

[factoid]

i think the conclusion is much more sweeping:

ninja = win
GA = lose

the ninjas are more consistent, easier to work on, parts kit is great, adjustable output, plus you have ray, who is the man, plus its made in the USA, competative pricing ...

rarily do me or bryce endorse a single product over any other. typically poeple will ask "what small bore barrel is the best?" and we don't really have a good answer for that. i mean there are lots of great small bore barrels out there. but when poeple ask about compressed air tanks and regulators, i have one answer: NINJA!

http://www.youtube.com/watch?v=Bj8ScksTLMI

http://www.youtube.com/watch?v=kQO961yTIWo&annotation_id=annotation_313149&feature=iv

http://www.youtube.com/watch?v=Xn4X387b85A&feature=related

http://spreadsheets.google.com/pub?key=tNzULgiZMiWwbd7paRrEWSQ&output=html

60 psi creep over 5 mintues, 340 psi swing over 2500 psi? NO THANK YOU.

I just bought a Myth tank a few weeks ago. It's working fine for me on a classic valve. supposedly it's set to around 850PSI..but I got the one that says "fixed high pressure" in the part description, so maybe they have LP versions as well and that's what people are getting stuck with.

It's not a fantastic tank by any means, but for 25 bucks it will definitely tide me over until I can afford a proper 68/4500 Ninja.

[SN toter]

Huh. I bought a 62ci steel tank from AVI with a Myth reg. I put it on my classic RT for an entire full day scenario. Went though several fills and never had any issues. Recharge was fine too.

[going_home]

If you look at the for sale thread in the first post the one I purchased
is the original Myth, not the G2.

Yeah, bought specifically for use on a mag.

I had to send it in the Gorilla Air on my Nichol,
because the marker wouldnt even fire at all,
and then it still wont work right on the mag.
It just chuffs and groans.

Frustrating, and a waste of time and $.

But the mag absolutely screams with the Ninja reg at 950 output.
And it was only $35.00 shipped brand new, made in the USA.

Just posting the results I had, both regs were purchased new.

[BenoitOWN]

Guerrilla Air is offering you a New 4 port Myth 4500 HP. They are sorry for your inconveince and neither Me or Guerrilla air doesn't like anyone to walk away unhappy with GA product. I just need your info and it would be free of charge.

If you doesn't like that offer what would make you happy that I and GA could do?






Also for my record what I did purchase directly from Guerrilla Air was some myth regulator that was supposed to be setted at 800-850psi so they could be used on Automag. I have my Bill for proof.

Person saying ''heard of and witnessed several of ripoffs from that member'' ain't true as I have always taked care of people who purchased from me and even spent extra money on shipping/packaging that costed me more than what I charged. Send refund when an item went missing to be delivered after 1month and a half.

All items from my store are legit and purchased from Manufacturer/Distributor.

I did what I could to help with your problem Going_home but something needing a replacement need to be handled by the manufacturer as I do not stock replacement parts or able to tech all gun/air tank.

[BiNumber3]

The 4500psi Myths 1st gen came with 650psi output, while the 3k regs had 850psi output if I recall correctly. Ive had a number of the 3k myths n none had problems running my classics and my RT's