View Full Version : Automags - Tech Forum
- Mag not firing
- EMAG ch.arger Issue
- lvl 10 silver spring
- Tickler failing after two shots on Egomag
- SHP Reg questions
- EMag Wire Lead --> Board
- Tap a valve
- LPR questions. MAchine work guys help!
- Just posting an idea.
- AGD Pump handle diameter ??
- CenterFlag frame
- ASA thred
- ULE polishing
- X-valve does not RT
- Vert ASA Screw question
- How to remove a Classic RT foregrip mould WITHOUT cutting it off?
- Wgp Hpr?
- Anyone make an EP Mag using a Shocker frame?
- Ult in emag
- Need fast x-valve help
- gas through foregrip question
- Carbon fiber trigger
- Tac One: stammering paint-blender
- O Ring Kits
- Carbon fiber parts!!
- Best detents?
- Questions on spydermag Frame build
- clamping feedneck on a warp
- Help with ULE/Xvalve and ULT
- ut oh.
- centerfeed modification
- Automag Double firing. Need Help!
- xmag steel breech oring replacement question.
- Pneumatic Hose
- Powder coating removal
- Benchy Frames
- Use of trigger stops
- Emag solenoid help
- EgoMag Question
- Source for O-rings and parts?
- pump mag question?
- Leaky reg...
- Mag not airing up right?
- polishing.
- New to RT
- Sear pin not recocking
- Safety for Hyperframe
- Varied Velocites
- Xmag short stoking in E, and a wire question
- Advice, what's the best way
- Easiest way to remove level x carriers?
- Fundamental Input Pressure Question
- Help with an IT automag body
- Thread Size
- Palmer Stabilizer minimum OUTPUT pressure?
- 06 Ego Board in Etek Frame
- ULT pressure requirements
- Level 10 Shims
- Ordering parts from AGD
- X-Mag on/off Issue
- My Findings on the MEDUSA Grip Frame
- Definite manufacturing issue with 2k9 mag
- Removing tip from RT Barrel for Anodizing
- Easy question about emag valves
- ULT and Classiv RT mag
- Pneumag question
- sticking on/off (tac-one)
- Retro Valve and 2k9 micromag
- emag safety
- Air Tank Valve Leaking
- Gas Through Frame Question
- O-ring questions
- ULT Input Pressure
- Long 3/32" bit - Where do you get them?
- Autococker tech support help Toronto
- Frame and rail help
- LPR for Pneu question
- Using a tickler LPR with SHP reg on Pneu.
- Getting a barrel unstuck
- EtekMag w/ E Mag Rail
- Dimensions
- Emag warp not working?
- CCM Tac1 feedneck
- Bolt occasionaly not resetting- tried everything
- E-Mag noob questions
- Pneumag Question
- My mag wont shoot
- Weird flatline reg system, please help
- Bumper question
- Under 210 FPS
- Custom Foregrip
- Just bought my 1st gun, need help with the other stuff
- Halo loader screw size?
- Battery Housing Dimensions
- Machine gun x-valve
- CCM Frame on a Mag?
- Mag sitting in closet for 8 years.... HELP!
- Flat Line Tank With a Remote Line?
- Pressure behind trigger, but gun won't fire.
- Classic Automag Problem.
- Anybody seen Tunaman??
- Emag solenoid wired backwards
- ULT little blsck oring
- Grip Screw Size?
- Brass AGD / Angel Detents
- Original AGD firmware
- Ninja regs and New Designz ASA problem
- Marker not shooting when pressure in tank <500 psi. Normal?
- power tube removal from x valve
- Logic Sleeper frame
- TAC ONE not fring like it should
- Flatline dovetail?
- Stock Break Beam Eyes with a Virtue Board
- Consistency issues with new ULT
- Can a Classic valve run a ULT?
- cutting the sear arm
- X-Valve problems
- Mini help
- Clippard MPA 3 help
- Pneumag trigger rod setup
- Single Trigger EP frame How to
- Bolt stick or spring?
- pump problem
- would a classic valve work with co2 if...
- Another round of name that on/off
- on/off teflon oring
- Resurrecting my Emag
- Mpa3 question.
- Any advice on this?
- Luke Extenders (Q On Physical Dimensions)
- first shot chuff
- Pneumag Conversion
- button repair on boards
- Pump Mag is Semi
- egomag question
- Pump question
- Warp feed - 9V Wires connection
- Trigger Pin out of Z Grip?
- Classic Valve Tech Question
- Can anyone create a aluminum selector switch?
- Warpfeed parts
- autococker - autococker
- Quick Emag Rail Question
- level 10 help....
- Please Help
- body F*ed, HELP PLEASE
- Classic RT crapping out.
- Warp Hose
- Bolt roughed up on the edges with auto response
- Problem with Charity Mag build
- x-mag won't fire using electro mode
- Delrin Super Bolt?
- Emag Help
- Are there any ambidextrous HPRs out there?
- I want to drill the back my Stick Grip for a 45* angle Input
- Spyder board
- Pulling the mag out of storage after 7 years
- Automag 68 Classic w/lvl 10 Going Full Auto
- So I must be bored...
- emag crashed (help needed)
- X-Valve leaking down powertube
- Level 5 question
- Please tech my xvalve that's been sitting in a bag for years!
- What is this on/off assembly?
- Palmer Stabilizer + Ninj Pro SHP on Automag RT
- Retro Valve not rapid firing?
- Circuit board repair
- screw hole diamater
- do stock x valves come with a rt on/off?
- RTP sear pin threads
- 15* ASA for Automag RT ULE Rail
- Emag Trigger Magnet Removal
- CP Direct mount sleeper mod leak
- shootdown on a classic Pneu-mag
- 68 classic valve trigger pull
- ult help?
- z-grip PNEU help
- Shortest twistlock barrel?
- egomag build/troubleshooting help
- RT Pro running away
- Stock feedneck on X-Mag's - removal?
- 2nd bushing for RT frame
- Level 10 micro cd??
- X valve mistery
- Preparing X-valve for anodizing...
- Protecting Raw Aluminum
- hard to cock pump
- Can I install lvl 7 bolt on a Xvalve?
- Minimag,x valve,ult
- Question about valve caps
- 30+ balls on 12gram!
- ReTro Valve Leak requestion
- how do I get this screw out?!?!
- sear question
- Xvalve only shoots every other time
- Flat line slow pressure
- Xmag help.
- Mag-feed Mag!
- UMF logic frame and rail help
- 12gram Efficiency mods. Pics and Props
- emag all of a sudden does not want to fire
- barrel pin
- automag will not fire, please help !
- Power Tube Tip
- questions :D
- Minimag,emag valve
- my first mag, need help
- Original X-Mag feedneck: Which loader?
- PTP RHF adapter fit a Zbody?
- 32* Frames
- Trigger question.
- Foregrip bracket slot for a Z-Grip
- CP On/Off question
- Warp tubing id
- Few mag questions
- Hyperframe on off pic
- Rebuild Kit for Classic Valve ?
- thumb screw/ frame screw?
- TL barrel O-ring size?
- ELBOW advice: Rotor on RT-Pro
- Torque out of a warp feed
- What are my tank options?
- PTP 09 MM Sear issue
- would a classic valve work on an egomag??
- xvalve removal first mag
- classic valve and retro valve reactivity?
- Trigger and Safety on Taso Frame?
- first strike rounds and your mag
- EMag safety ball stuck :(
- tech related ?'s
- Black SS body
- ULE body question
- On/Off leak
- need help with wire connectors
- bolt stick?
- Ano striping a barrel?
- Level 7 bolt with ULT trigger kit?
- Need help with Z-grip
- Does xvalve parts kit come with UL Trigger orings?
- making the warpfeed run wirelessly? w/o sound activation.
- Question about the No-rise body.
- Ule body feedkneck question
- Deadly winds forgrip on tac-one
- building first Mag
- back to PB and picked up a pair of mags
- Classic AM Rail Sear Pin help... quick ?...
- Shortest air thru?
- thoughts on RT classic/mini combo
- Rainman pump kit
- Minimag with retro valve,barrel leak and reg leak.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.