View Full Version : SFL Mag -VS- X mag
FortySix&2
09-15-2003, 03:22 PM
OK, probably a dumb question. What exactly is the SFL mag and is it better / equal to the X-mag?
Kinda off subject, but what is the Tuna-bolt about and where did it come from?
One more question! I see E-max on some bolts (electric-like E), what is that?
Kevmaster
09-15-2003, 04:19 PM
SFL have all aluminum bodies made by Shocketch. They are internally the same as an X-Mag. They can be modded by AGD (for free) to accpet an Anti-Chop eye like the one on the X. So, other than looks on the body, they are the same marker. They are also rarer than the X (~200 Xmags ~30 SFL EMags)
there is no "tuna-bolt" that I know of. there is a Level 10 Bolt (LX) that is made by AGD and is made to prevent chops. It does a FANTASTIC job as everyone here will tell you
The EMaX valve is the new logo engraving on the emags to denote it is an emag and it has the 'x' valve (all aluminum body, level 10 bolt)
you can get an xmag, but you'll have a harder time getting an sfl emag :)
gibby
09-15-2003, 04:51 PM
I believe the tunabolt is an Xvalve with a tuna engraved on it. Check out Jack&Coke's thread of his Tunamax.
Kevmaster
09-15-2003, 06:46 PM
Well I'll be damned....
cool! Go Tunaman!
Kevmaster
09-15-2003, 06:51 PM
Well I'll be damned....
cool! Go Tunaman!
Marek
09-15-2003, 07:00 PM
Like Kevmag said, it's a Shocktech E-mag. The weight is about the same, but there are a few differences. There is a special lvl. 10 kit for the SFL. I would say they are about the same, just some minor differences with the way it was made.
I've never heard it as Tunabolt, but yes, Tunaman adds an engraving to the X-valves. Jack and Coke has one. Check it out.
FortySix&2
09-15-2003, 07:11 PM
Sorry, but by Tuna-bolt i actually was referring to the Tuna I see engraved on the back of some valves. This is just something that Tunaman does when he sells/distributes them?
Kevmaster
09-15-2003, 07:38 PM
yes, as Jack and Coke's mag. If you order a custom emag from Tunaman here on hte forums (send him a PM for a quote) it will come with the tuna engraved into it.
ntn4502
09-15-2003, 08:45 PM
I heard the SFL was better
Originally posted by ntn4502
I heard the SFL was better
thats the rumor going around ;)
Marek
09-15-2003, 09:04 PM
Originally posted by ntn4502
I heard the SFL was better
Why??
speeddemon
09-15-2003, 09:05 PM
Originally posted by ntn4502
I heard the SFL was better
Yeah, they managed to get a special run of magic elves to put in the SFLs, but they ran out pretty quick, which is why they stopped. ;)
Kevmaster
09-15-2003, 10:26 PM
they're just pissed they cant have the beauty of an X. the sexyness of the curves rival...well...nothing...
Load SM5
09-15-2003, 10:27 PM
Oh yea.....real bitter here.:rolleyes: :D
the_next_guy_
09-15-2003, 10:39 PM
when you turn on an SFL, it says shocktech on the LED screen
adam shannon
09-16-2003, 12:37 AM
theyre both ok, bout the same id guess.
Brett23
09-16-2003, 07:06 AM
how could they be any different other then milling and the shocktech on the board when it boots up. They are both emags. A big old battery, an RT valve, and a noid to trip the sear (overly simplified). Although I think i dig the sfl looks better.
Dayspring
09-16-2003, 09:08 AM
Sarcasm dude...
All the guys who say that the SFL is better OWN SFL's.
:rolleyes:
-=Squid=-
09-16-2003, 09:27 AM
Yes, what you are calling the Tuna bolt is actually the X valve, with tunamans logo engraved on it. Valve = not bolt.
Load SM5
09-16-2003, 11:47 AM
Originally posted by Dayspring
Sarcasm dude...
All the guys who say that the SFL is better OWN SFL's.
:rolleyes:
SFL's are better.....:D
Dayspring
09-16-2003, 11:51 AM
BAH!
RRfireblade
09-16-2003, 11:54 AM
Originally posted by Kevmaster
they're just pissed they cant have the beauty of an X. the sexyness of the curves rival...well...nothing...
Originally posted by Load SM5
SFL's are better.....:D
Originally posted by bunkerhugger
Is the SFL bolt interchangeable with a standard level 10 bolt?
You can run a std lvl10 bolt in an sfl but not the other way around. The sfl bolt has an increased diameter at the tip of it.
Originally posted by gibby
I believe the tunabolt is an Xvalve with a tuna engraved on it. Check out Jack&Coke's thread of his Tunamax.
which would void your warrenty?
Dayspring
09-16-2003, 05:29 PM
No. Because it was done by AGD themselves.
Originally posted by gtrsi
which would void your warrenty?
FooTemps
09-16-2003, 05:52 PM
SFL vs Xmag
Basically think of it as different millings of the same gun. Like taking an angel and putting some milling on it.
RRfireblade
09-16-2003, 05:57 PM
Originally posted by FooTemps
SFL vs Xmag
Basically think of it as different millings of the same gun. Like taking an angel and putting some milling on it.
Right, one sexy and the other.......different.;)
Jay.
Originally posted by RRfireblade
Right, one sexy and the other.......different.;)
Jay.
yeah why they made the xmag look so bad is beyond me too man
RRfireblade
09-16-2003, 06:12 PM
Originally posted by LaW
yeah why they made the xmag look so bad is beyond me too man
Hey,you put a smiley on thier or it's gonna get ugly.:mad:
Jay.
Marek
09-17-2003, 02:09 AM
I don't know, if I had a choice, I would pick the X-Mag over the SFL. Made by AGD, and with proper measurements.
I owned an SFL E-Mag, and had to get the opening for the bolt shaved down to accept Lvl. 10 (the one for the SFL) The opening was an oval shape and wouldn't let either bolt (SFL and regular) fit. Needless to say, after a lot of chopping, it was fixed.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.