PDA

View Full Version : Compatibility question


Biscuit
09-24-2003, 09:53 PM
This may have already been asked and answered but since I'm new here I'll ask again. Is the new LX compatible with a Centerflag/Booyah type trigger frame?

Thanks in advance
ChucktheMAGician
09-24-2003, 10:00 PM
Yes, and Welcome to AO:)
Kevmaster
09-24-2003, 10:00 PM
Most certainly is
Biscuit
09-24-2003, 10:03 PM
Thanx guys. Have you installed them on your markers? Any helpful tips that you might be able to offer me would be greatly appreciated.

Thanks again
ChucktheMAGician
09-24-2003, 10:09 PM
I have LX in my emag and my Retro Valve. I use just a classic valve on my Boo-yaah Micro, not enough money for an extra LX kit right now. :( If you have the mag running right now switching over to LX would be as easy as using any other frame. Here's a good thread to get you started, http://www.automags.org/forums/showthread.php?s=&threadid=40904
Biscuit
09-24-2003, 10:17 PM
I have 2 Mags, one with a Boo-yaah frame and the other with a TASO .45 grip frame. I'm trying to install the LX on my ELCD framed Mag, but wasn't having much success. I have ordered new parts for the AIR so I can turn up the pressure without it venting on me (having a senior moment 'cause I can't remember the parts name).
Biscuit
09-24-2003, 10:27 PM
I've been over all of the install tips from AGD on the supplied mini disc. I have some other things to attempt on my install before I really go bonkers. What carrier/shim setup are you using for yours?

Thanx again
Dayspring
09-24-2003, 11:30 PM
Reg piston.



Originally posted by Biscuit
I have 2 Mags, one with a Boo-yaah frame and the other with a TASO .45 grip frame. I'm trying to install the LX on my ELCD framed Mag, but wasn't having much success. I have ordered new parts for the AIR so I can turn up the pressure without it venting on me (having a senior moment 'cause I can't remember the parts name).
Biscuit
09-25-2003, 12:04 AM
Thanx Day! (Note to self: Remember to take your Ginko):D
ChucktheMAGician
09-25-2003, 03:13 PM
Originally posted by Biscuit
What carrier/shim setup are you using for yours?
Thanx again
Middle Spring, 2 shims and 1.5 carrier.
Big'n slo
09-25-2003, 03:18 PM
Originally posted by ChucktheMAGician

Middle Spring, 2 shims and 1.5 carrier.


Ditto for my Hypermag
Biscuit
09-25-2003, 03:28 PM
Thanx Chuck & B 'n S. I'll give that combo a try. I found that the 1.5 worked for me as well but since I need the new HP reg piston I'll have to wait for them to come in before I do much more.