Degassing an e-mag???

[purplemag]

Setup:
Micro E-mag
LVL 10
E-mag valve
Macroline to SS AGD disconnect to max flo
Max flo 4500 reg w/ on/off

So when I stop shooting for the day or moment and want to totally degass the gun... I turn my tank reg on/off to off. I can then shoot in e-mode or manual of course until the gun does not have enough pressure to fire again. This always seems to leave about 400 psi charged in the hose and valve, I am guessing due to the LVL 10. This causes a very loud pop when using the SS disconnect. Does anyone have a solution for this? I think I am doing this all right, or am I going to have 400 no matter what? :confused:
if you need a pic of my setup, pm me I can email it...I don't think attachments are working!

[Remington]

No, thats about as good as you'll get without going out and spending $50 on a ProConnect. ;)

[11_Mile_TMaster]

mmm... idea...

Hold the trigger back in manual when you're turning off your tank. It should greatly reduce the amount of pressure in the system (I think?)

[PyRo]

We all get that (even without level 10). I think your pretty much doomed to the 400PSI still in there, just pull the quick disconnect. Ever a screw in tank will release the pressure when taken off...

[jaylock33]

slide checks are another option.

[PyRo]

Save fifty bucks and deal with a little pop :)