PDA

View Full Version : ReMoTe WiTh MaG


Iron Mag13
10-28-2003, 07:19 PM
Ok on th "Offical pics" i was looking around and saw a mag with no macro line just a remote hooked up directly....getting a mag for X-Mas and was wondering if anyone knew ho.....Heres the link to the pic...the pic is on the 6th page and the 6th post....Here 6th page....6th post (http://www.automags.org/forums/showthread.php?s=&threadid=5895&perpage=30&highlight=offical%20pictures&pagenumber=6)
rmhawk
10-28-2003, 07:34 PM
What?

Just buy a remote hose. One end screws into your tank the other hooks to the gun.

:confused:
Iron Mag13
10-28-2003, 07:35 PM
I know that i have a remote just saying how to do it and if u have to have anything to do it or cost anything!
pointm@n
10-28-2003, 07:46 PM
You probably just need a 90 degree adapter and then a male quick disconnect fitting on the valve. then the female QD fitting on your remote should just hook up to it. nothing fancy?

looks like the guy has a slide check as well on his remote, not needed but nice to have...
PyRo
10-28-2003, 07:56 PM
Nope, you don't need anything you can just screw the remote right into your valve.
But then you have a remote that you cannot take off your valve without a big hastle, you will want that 90 degree adapter (a couple of dollars), and atleast a quick disconnect ($10 or so), but a pro connect or somthing so that you wouldn't have to turn off the air every time you wanted to disconnect it might be more convinent.
Iron Mag13
10-28-2003, 08:54 PM
Yes oi have a quick disconect and i would proboly like to get the male adapter any of guys kow what sties i can find it at
PyRo
10-28-2003, 08:59 PM
www. your local paintball store .com
Iron Mag13
10-29-2003, 07:51 PM
can u give me an actoully name case i didd a search at 888 paintball and it came up withe 12 pages so a little more descripion and maybe a pic souyld do
PyRo
10-29-2003, 08:10 PM
http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=105&CATID=6
Female Q/D

http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=106&CATID=6
Male Q/D
Iron Mag13
10-30-2003, 05:58 PM
so after i get that what do i do?
PyRo
10-30-2003, 10:30 PM
You get a 90 degree adapter as well (I highly recommend just going to the local paintball store for these air fittings).

Screw the 90 degree adapter into the valve, then screw the male end into the 90 degree adapter, then put the female end on the remote. Once you have everything in your hand its really easy to figure out. And if you go to your shop they should show you how to set it up, or even do it for you (I wouldn't pay them to do it for me though if they want labor).