PDA

View Full Version : LvLx q


$tevo
11-03-2003, 04:29 PM
hey, i just installed my lvl x yesterday, and i filled my nitro today to test it out. now its leakin outa the barrel, could it be the orings or maybe the spring i put in with the lvlx? should i try using the smaller spring? lmk thx
Branchvillian
11-03-2003, 04:33 PM
Try switching to a smaller carrier.
Dayspring
11-03-2003, 04:34 PM
But switch to the smaller carrier using the SAME oring you have in the gun now.
$tevo
11-03-2003, 05:01 PM
ok ill try, so i should leave the same spring on to? when i pull the trigger w/ air in it, just just pores outa the barrel
Branchvillian
11-03-2003, 05:04 PM
How many shims do you have? Next time that happens try pushing the bolt back wth a squeege.
$tevo
11-03-2003, 05:07 PM
how do i get the carrier out, i took the power tube out but i the carrier wont come out
Branchvillian
11-03-2003, 05:11 PM
I use a dental pick, I'm not sure you have one though. Be careful with whatever you use to take it out.
Skoad
11-03-2003, 05:11 PM
you can use a dental pick or something of the sort....or your field strip screw should fit down in there, just be careful so it doesn't mess up the oring
$tevo
11-03-2003, 05:17 PM
i just put another shim in and its alot worse, so i gotta take the shims out and put a smaller carrier in i guess. but i cant get the freakin thing out
Benfica4ever
11-03-2003, 05:21 PM
Lvl 10 takes a while to get it just right. i had o go though 2 tanks to get it.
FreakBaller12
11-03-2003, 05:27 PM
take your field strip screw and see the hoel down the carrier?
screw your field strip screw down it and pull, vwola
$tevo
11-03-2003, 05:30 PM
awesome..it stoped leaking..thx guys, when it stops leakin, does that mean its tuned? i hope:D
$tevo
11-03-2003, 05:32 PM
man...theres gas in it, stoped leaking, and i can feel that the gas is in it cause the triggers tight. but now it does not shoot
Benfica4ever
11-03-2003, 05:37 PM
And once you get it to shoot you will probably have to go down another carrier sonner or later becuase the o-ring will be very worn in.
$tevo
11-03-2003, 05:41 PM
oh no! its leakin a tiny bit again. should i take 1 more shim out? i have 2 in there right now.
$tevo
11-03-2003, 06:35 PM
ok guys, its done leakin but it wont shoot.i have 1 shim in it, and a carrier with 1 groove. what should i try next, maybe go back to the carrier with 2 grooves with only the 1 shim in it
DJBacon06
11-03-2003, 06:37 PM
turn up the velocity?
$tevo
11-03-2003, 06:54 PM
yea i tried that..hmmm thx for the thought tho
FreakBaller12
11-03-2003, 07:05 PM
go back with the tiny leak, your carrier oring has to broken in, it shoudl turn a whitesh brownish, put air thru it and it will be fine
$tevo
11-03-2003, 07:11 PM
so let it leak a little bit? ill try it, i forget what was in it when it was a tiny leak
$tevo
11-03-2003, 07:13 PM
does it matter what spring i use? im using the one it says to use on the lvl 10 guide