PDA

View Full Version : Warp feed 12 BPS?!


momags!
11-24-2003, 11:49 PM
Correct me if I'm wrong, as I may very well be, but on the AGD website, they claim the warp has a feed rate of 12BPS @ 9v. I was under the impression that these things were 20+.

Also, would I have to buy the PTP feed neck adaptor to make this work on my micro?
hAppy
11-25-2003, 12:21 AM
you need the ptp adapter for non-AGD guns

umm, i thought they were 20 too... :confused:
pointm@n
11-25-2003, 12:42 AM
I think the stock ones do 12bps. If you do the 12V mod it takes it up to 20+
momags!
11-25-2003, 01:46 AM
Well, the PTP website claims 20 at 9v. They sell the 12v mod you mentioned to give it "the extra power to really rev it up." (however many BPS that equates to is anyones guess)

However, I'll believe the manufacturer over a retailer any day of the week and at 12BPS you're gonna be outshooting it at some point.
PBinOR
11-25-2003, 04:56 AM
9 bps is about right stock.
20 bps is about right with the 12volt mod.

It takes about 1/2 hour to do it yourself with parts you can find at any radio shack. It is well worth it and will cost you a total of like $7.00
bryceeden
11-25-2003, 08:27 AM
Its 16 stock and 24 with the 12v mod, look here for more info
http://www.automags.org/forums/showthread.php?s=&threadid=50487
Wc Keep
11-25-2003, 09:24 AM
Originally posted by PBinOR
9 bps is about right stock.
20 bps is about right with the 12volt mod.

It takes about 1/2 hour to do it yourself with parts you can find at any radio shack. It is well worth it and will cost you a total of like $7.00

its definately not 9 stock because im shooting 13 and am far away from outshooting it.
LittlePaintballBoy
11-25-2003, 02:51 PM
I know where to get a warp that can do 30...:)
BajaBoy
11-25-2003, 03:35 PM
AGD warp feed stock is 16BPS @ 9vt
PRO Team claim 20BPS @ 12vt
FragTek
11-25-2003, 05:40 PM
Well, I warped my old LCD Matrix which I clocked at 23bps with my 12v modded warp and it never skipped a beat with a Halo on it. So I will POSITIVELY say without a doubt that a 12v modded warp with fresh batteries will feed 23+bps. And stock, I know that those things are slow, I used mine stock for a day before I couldnt stand how freakin slow it was, I would guess about 13bps.
AutomagRT1483
11-25-2003, 11:51 PM
Im sitting at 12 bps right now and Im nowhere near outshooting it. I did 12v it too.
sneakyhacker420
11-26-2003, 01:02 AM
my micro e-mag constantly hits 20bps over the chrono and in-game... warp with 12v PTP connector hasnt skipped a beat yeat in 4 cases :eek: :p

http://fallingaway.com/ao_upload/sneakyhacker420_microewarp.JPG
FragTek
11-26-2003, 08:39 AM
Thats a nice micro sneaky :)

*He likes to show it off, its his pride-n-joy!*