Bad Trade... ULE Gun problems...

[Jon/xpm]

When i got air today to try and play with my ULE Mag for the first time since i bought it and use it for pratice, the gun did not work... So we decided to put another x-valve on to see if its the x-valve or the frame...
It was the intelliframe and this was easy to find out
when logamus valve did the same thing as mine did....
((Thanks logamus for letting me use your x-valve and thanks
for your time))
I just got the gun and have not even been able to play with it or nothing...

The guy who i bought the gun from will not pay to get it fixed and knew the intelliframe did not work properly

What am i suppose to do?

If the intelliframe is not working properly
its the sear correct?
Also the gun has a nasty beaten up on/off pin and missing a bolt foamie :mad:

[Snertz]

Replace the on/off pin first, since you noted that it was beaten up, and might be sticking.

Next, check the sear rod length, maybe that was out of wack? Make sure theres a small gap between the trigger and the rod itself.

What exactly is wrong with the frame?

[Jon/xpm]

Snertz-i know its not the on/off pin
because it did the same problem with another x-valve..
but the on/off pin still needs to be replace...

When you pull the trigger it shots mulitple shots with one pull...

How do i check the rod length?

I will look at everything tommorow...

[LaW]

Originally posted by Jon/xpm
Snertz-i know its not the on/off pin
because it did the same problem with another x-valve..
but the on/off pin still needs to be replace...

When you pull the trigger it shots mulitple shots with one pull...

How do i check the rod length?

I will look at everything tommorow...


Whats your input pressure? Sounds like the trigger is just really reactive...

[ZAust]

multiple shots with one pull? definately sounds like a worn sear. replace that, and your problems will disapear.(feel my freshy rhyming skillz)

[LaW]

Originally posted by ZAust
multiple shots with one pull? definately sounds like a worn sear. replace that, and your problems will disapear.(feel my freshy rhyming skillz)

Actually yeah what he said :) I was thinking sear before just posted the wrong thing then went back and read the thread more haha

[Jon/xpm]

i was using a 68/45 pmi so about 800-850 psi...

[speedyejl]

New sear assy, new on/off, order a foame while your at it.

[GT]

Jon,
I had an RT i used years ago w/ a preset tank. All I ever got was run away so maybe it is an on/off, worn sear, and a high input press tank.

Check those three and see how it goes. If you are in a bind and need one on the quick LMK I think I have an extra sear I can let you borrow, until the next AO meet.

jb

[ICOM]

Pretty much what everyone else said.

Needs a new sear, that should fix your problem is your input pressure isnt too high.