PDA

View Full Version : A Closed Bolt Impulse


Jeremizzle
12-22-2003, 04:43 PM
Ok,
On a 5 hour busride me and my friend got a little bored. And we came up with this crazy idea...an impulse that has such a low pressure that it runs like a closed bolt gun. We have yet to try it...but the idea is to get two lpr's. On, you set up just like normal. You put another one on, mounted on the asa and buy an extra long tube wrap it around the gun and put it in the back insert where the back guage would go for your first lpr. Therefore when both of the lprs work together the bolt chamber pressure goes down low as crap making it sensitive like a closed bolt gun. Yeah...it's crazy and i doubt it would work.
DJBacon06
12-22-2003, 05:09 PM
Originally posted by Jeremizzle
Yeah...it's crazy and i doubt it would work.

me either...but good luck jeremy
mag-hatter
12-22-2003, 05:13 PM
no shootdown would be too much. just get an 03 shocker it hink those are closed bolt ;)
1stdeadeye
12-22-2003, 05:15 PM
Originally posted by mag-hatter
no shootdown would be too much. just get an 03 shocker it hink those are closed bolt ;)

No the old shockers were Closed bolt. The new one is a spool valve like the Matrix.
Python14
12-22-2003, 06:25 PM
How would LP operation make it closed bolt? or like closed bolt?
IWANTMOREMAGS
12-22-2003, 06:39 PM
It wouldn't work. You could maybe shoot 2 or 3 shots before they start going nowhere.
Jeremizzle
12-22-2003, 08:17 PM
Originally posted by Python14
How would LP operation make it closed bolt? or like closed bolt?
Because in closed bolt guns, theres a seperate air chamber for the bolt that runs at a super low psi.
TransMan
12-22-2003, 08:27 PM
Sounds liek a lot of work to do to a crappy gun to make it crappier IMO :)
Python14
12-22-2003, 09:44 PM
Originally posted by Jeremizzle

Because in closed bolt guns, theres a seperate air chamber for the bolt that runs at a super low psi.

um dude....there already is a seperate air gallery. The ram/solinoid are given their own air. You system is no closer to a closed-bolt gun than it would be before the modification. The only difference would be bad efficiency and probably less than stellar consistency.
Jeremizzle
12-23-2003, 01:57 PM
Originally posted by Python14


um dude....there already is a seperate air gallery. The ram/solinoid are given their own air. You system is no closer to a closed-bolt gun than it would be before the modification. The only difference would be bad efficiency and probably less than stellar consistency.

How would a super low psi have bad consistancy? There is no seperate air gallary for the bolt either the valve opens, and the air moves through and pushes the bolt foward. It's just an idea...
RRfireblade
12-23-2003, 02:53 PM
Just do this......


http://server5.uploadit.org/files2/231203-shocker.jpg
1stdeadeye
12-23-2003, 04:40 PM
Originally posted by RRfireblade
Just do this......


http://server5.uploadit.org/files2/231203-shocker.jpg

ROFL!!!!!!!

LOL!!!!!:D
DJBacon06
12-23-2003, 04:44 PM
YAY! go shoebox sized guns!
68magOwner
12-24-2003, 02:05 AM
ugg, that pisses my off, shockers are not that big! and light as hell! alot lighet than my mag! the ONLY downside i saw to mine when i had it was the limited ROF, the marker could only cycle 13bps, less than impressive, but it still got the job done, and done well, so stop all the hatin, its like racism, shockers arnt differnt than other markers, but ya still hate em without even knowing em. :p rant 4 the day
nastymag
12-24-2003, 04:30 AM
yeah i really liked my old shocker ( wont support SP anymore though)

by the way ...the ROF on the old shockers was 11.25 bps
it was never lower or higher in any of the models.
laxkid
12-24-2003, 05:56 PM
I had 68magowners old shoebox for about a week it was light and it was almost as small as an imp but it will always be my favorite shoe box.

P.S. I like my emags better than any sp gun ;)
toolfan62
12-24-2003, 06:14 PM
Originally posted by RRfireblade
Just do this......


http://server5.uploadit.org/files2/231203-shocker.jpg

man shockers are so ugly:p
68magOwner
12-24-2003, 06:55 PM
natsy mag, there were custom chips to go a wee bit faster (dunno if for resale) and everyone else (except laxkid and nastymag who were pro-shocker) i bet it thinks your ugly too! and guess what! your bigger than a shoebox you schmucks! :p
DJBacon06
12-24-2003, 10:07 PM
Originally posted by 68magOwner
ugg, that pisses my off, shockers are not that big! and light as hell! alot lighet than my mag! the ONLY downside i saw to mine when i had it was the limited ROF, the marker could only cycle 13bps, less than impressive, but it still got the job done, and done well, so stop all the hatin, its like racism, shockers arnt differnt than other markers, but ya still hate em without even knowing em. :p rant 4 the day

yeesh it was just a joke:) but seriously, they aren't bad guns. one of my friends currently owns one and another one used to have one.
68magOwner
12-24-2003, 11:49 PM
i know it was justa joke, but all the shocker "jokes" influence the noobs, nobody gets em, and resale goes straight down the toilet while impy resale sky rockets, u do know they retail for more than impy's, but i got a good trade 4 mine, so watever
DJBacon06
12-24-2003, 11:51 PM
oh, whoops...SHOCKERS OWN ALL!!

better?;) :D
chizle97
12-25-2003, 12:56 PM
you could just cut the bolt in half on a stock bodied impuls and cap the back ed and VAULA! closed bolt!
mag-hatter
12-25-2003, 10:15 PM
Originally posted by TransMan
Sounds liek a lot of work to do to a crappy gun to make it crappier IMO :)

LOL! WORD UP BRO! EVEN THOUGH IT CAN KEEP UP WITH AN XMAG! LOLOOOLLO!!!!!!!!!!!!!!!!! oh, and they run at a very low psi, they look good, they have tones of upgrades avalable, and they dont cost everything you own.