PDA

View Full Version : Help Me Please


Ross57969
12-26-2003, 06:12 PM
Today i bought a large shocktech drop and a 68 45 pure energy nitro tank. Well i get it all home and i screw my tank in and there is A HUGE leak comming towards the back of my avi impulse. ANYONE KNOW WHAT THE HELL IS GOING ON?
ß?µ£ §mµ®ƒ
12-26-2003, 06:50 PM
Too vague, hmm loctite everything? or tfe tape? oil your gun? out put pressure too high? (not likely) is this problem just with your gun or is it leaking over places?
FreakBaller12
12-26-2003, 07:15 PM
did u tephlon the dovetail extra ports?
barberjohn
12-26-2003, 10:08 PM
is it coming out of your solenoid or the solenoid air passage. if it is from the air passage, then you need locktite, not teflon, since teflon can come off and if it gets into your solenoid, it wont be pretty. now if it is coming out of your solenoid, then you need to turn down the pressure coming from either you high pressure reg, or your lpr, if you have one. that should fix it, but like previously stated, you are being a little vague.
Ross57969
12-26-2003, 10:31 PM
the leak is comming from somewhere above the solenoid housing. A very small area(output pressure on tank is 850)
this is a new gun never been used. THE LEAKING AREA IS A VERY SMALL ALLEN SCREW I THINK
$tevo
12-27-2003, 11:27 AM
take it to your local shop if your not sure what to do with it
03vert
12-27-2003, 11:46 AM
is your solenoid on correctly?my friend had the same prob with his gun (an imp) he thinks because he shot black shelled paint and when he took it apart to clean he put it back on the wrong way. good luck