Stock Timmy Trigger + Dremel = PIMP Custom Trigger

[sneakyhacker420]

during the past 3 weeks, i've taken my dremel, hand file, and sandpaper to my stock timmy trigger

first it came out with a rounded hump... then an intelliframe-like blade... and now its a home-made techna trigger Katana (but made out of aluminum)

right now i'm running it on 8m/s debounce and no spring - it absolutely RIPS

here it is (yeah, yeah, i know its scratched up a bit)

[sneakyhacker420]

in the gun

[personman]

Raise your hand if you care

[M-a-s-sDriver]

Hand up

Thats a lot of work.
Brent.

[Mag Master 04]

SEXY SHIZNIZZLE...lollookin good

[Nomad]

Sweeeeeeet.

Just get her polished and clear anodized and that'll be pimpin'.

[sneakyhacker420]

it'll go in with ano when i anodize the whole gun lime green with black accents :D :cool:

[Load SM5]

Dang, that had to take some time. Nice job. I'm still going to go with a rapier techna trigger for my 2k2. I like the hump for raking.

[sneakyhacker420]

i like the humps for raking, but i find walking much more feasable in-game

and load... you dont wanna know what my field tech called you last week :rolleyes:


wanna hear the story?

[Load SM5]

Do I know your field tech?

PM with the story.

[personman]

Sneaky said he called you a sexy beast ;)

[Load SM5]

Oh, well you know...I am.:cool:

[Big_Chops]

nice job sneaky. :D:D:D

[SpecialBlend2786]

wow that looks really nice. very nice job sneaky.

[f3rr3+]

i hate timmys...

that said, AWESOME JOB... :D

[sneakyhacker420]

see adam... people DO care


and i think that you have some excessive PWing problems that Cphil might be able to take care of :o

[1stdeadeye]

Originally posted by sneakyhacker420
it'll go in with ano when i anodize the whole gun lime green with black accents :D :cool:

Nice job, must have aken time and patience. That being said: WTF-Lime Green?:confused:

[personman]

Originally posted by sneakyhacker420
see adam... people DO care


and i think that you have some excessive PWing problems that Cphil might be able to take care of :o
I have some excessive pwing problems that Cphil might be able to take care of? Diddnt you just get your post count deleated? What, and you're already back to 110?

[Blazingace]

I like it alot.

On that note. The CP trigger for the Matrix is the next thing for my Ironman. Looks similar and is uber sexy.

[Evil1]

That is very cool Sneaky. I tried that once w/ my EMag trigger and had to get a new one. I'm glad it worked for you and that it works well. I also noticed your # of posts was reset. How did that happen?

[sneakyhacker420]

cphil reset my post count

and if you grind down the e-mag trigger too far, the threads for the magnet adjustment won't be able to grip it correctly

[bunkermaster10]

One of my teammates did that with his GZ and its crazy.

[Evil1]

Why did Cphil do that you had quite the impressive number going? And about the EMag trigger yeah I know. What you described is what I did.

[Beemer]

Raise your hand if you care

Raises Hand

personman=rude

Nice Mod sneaky

[breg]

sneaky,
I want to say that it looks nice, but I have to wonder if you have too much free time on your hands. Just kidding. Good job though, by the way, how long did it take?

[Automaggin2]

Wow sneaky that looks awesome, but if you were a real man you would have used nothing but sand paper :) :p

[sneakyhacker420]

3 hours each day... one day a week... for 3 weeks (changed after every day of play... until now :D)

[SpongeBobSquarePants]

Looks very nice, I may try and find a dragon trigger just to do that mod :)

[sneakyhacker420]

i never knew that my dremel work was so enjoyable :p

you shunned me for taking the dremel to my spyder... now you hug me for taking the dremel to my trigger :p


edit: sponge, you may wanna take a couple spaces out of your sig between the picture and the good traders :rolleyes:


and its a bit big for sig guidelines too anyways :o

[mag-hatter]

i like how it actually "pimps" unlike all of the other paintball products that promise to do so....:rolleyes:

"pimp(en)(ed)(tastic)" is the worst way to describe anything that doesnt have a heart, two legs and a purple hat with a feather on it.

[sneakyhacker420]

would you rather it was []D [] []\\//[] []D ?

[afrankart]

I did my stock viking trigger today at work.
http://www.flagpull.com/AKA/trigger5.JPG
http://www.flagpull.com/AKA/trigger4.JPG
http://www.flagpull.com/AKA/trigger3.JPG
It weighed 11 grams before, 4 after.

[sneakyhacker420]

too flat for my tastes

i really like triggers that have the inward cuve to them

[afrankart]

being it was a blade trigger, there wasn't any curvature for me to work with in the first place.

[Evil1]

Hey Sneak you should make a vid of you shooting that timmy and your green micro EMag while your at it.

[sneakyhacker420]

i would... but

1. my video camera SUCKS
2. i need a firewire port to upload the videos
3. i need to learn how to use a video mixer

[Big_Chops]

4. you need to learn how to spell LEARN.:D

[sneakyhacker420]

my dad was forcing me to go to bed so i was typing in a hurry - if i didnt get in bed by 11:30 i would've lost my computer for a week :(

[Evil1]

I hear ya sneak I'm learning how to make vids myself. Once I get my 3.2 I will post some cool vids.

[JKW]

sneakyhacker420,
Looks good. I know what you went through, since all Katanas start as a "blank" that is shaped kind of like the stock, or "Dragon" trigger. The hump is removed and the trigger further shaped to end up as a Katana. Rapiers, Sabers and Katanas are all made from the same blank.

afrankart,
Taking that trigger from 11 grams to 4 is very impressive. I am exploring some ideas on a modified Rapier in my Alias, to see how light I can go. It is below 2.5 grams at this point and should go well below 2 grams before I have to begin to worry about strength. I love/hate carbon fiber!

[trevorjk]

Originally posted by sneakyhacker420
i would... but

1. my video camera SUCKS
2. i need a firewire port to upload the videos
3. i need to learn how to use a video mixer

no offense but with all the guns you have im positive you or your parents would buy thats stuff in a heartbeat...


but back to the subject very nice reminds me of the angel trigger and i love that thing... i was going to do that to my intelli blade trigger make more of a curve and slicker design... also have a really short trigger pull instore if things work as planned who knows myabe ill show you at bfg someday

[Nick O time]

actually he buys all of his guns himself, or his parents do then he pays them back.

[trevorjk]

but still tell your mom then that your computer is broke and it needs firewire port for the harddrive or some crap like that... if my mom had money she would fall for it... and as for video editing software im sure you can find a nice free 1k program online some where;)

[Load SM5]

Originally posted by JKW
sneakyhacker420,
Looks good. I know what you went through, since all Katanas start as a "blank" that is shaped kind of like the stock, or "Dragon" trigger. The hump is removed and the trigger further shaped to end up as a Katana. Rapiers, Sabers and Katanas are all made from the same blank.


I did'nt realize you were a member here. I just ordered one of your rapier triggers last night for my Timmy. I loved the way Manike's felt too much.:D

[JKW]

Load SM5,
Thanks for your order! I am just about finished with all of my backorderd triggers (what a job that was!) and will start on the new orders then.Yours will go out on Monday at the latest and you should have it by Wednesday.
Jason

[sneakyhacker420]

i see that you used my suggestion to hop on over to AO :D

and yeah, its still got the thinner bottom half, but until i have the cash for one of your secksy techna triggers... this'll do

and i got rid of all but .25 MM of side-to-side wobble by greasing the trigger screw and the sides of the trigger where it contacts the frame and tightening it down as hard as possible as long as it could still move :)

[Evil1]

Are there any other triggers for the Emag besides the LT3 blade?

[sneakyhacker420]

TL63 and customized stock ones... JKW from techna trigger will be making a roller-bearing carbon fiber trigger for the e-mags if there is enough interest in them

[Load SM5]

I would definately be interested.

[xrancid_milkx]

You can add me to that list as well

[sneakyhacker420]

http://www.automags.org/forums/showthread.php?s=&threadid=118088

check that out load and rancid


ps: load, if you'd like to fix the /'s in the poll, feel free do edit it