Warp feed differences?

[tattoo]

Can someone tell me the difference between AGD's Warp feed and ProTeams Warp feed? I want to try one on my micro emag. And I see on paintball gear.com the AGD one is quite a bit cheaper. And it says on the site the AGD one comes with the universal mount now. Also do I have to purchase and intelifeed cable seperate? Thanks "Lou"

[2UnREal]

The ptp warps are more sensitive than the AGD ones. But if you are going to have intellifeed then get the AGD warp.

[Russ]

I have, within the last 2 months, bought both a PTP warp and an AGD unit. The AGD one won't fit onto your eMicro. You'd have to get the PTP adapter ($30) that fits into the vert feed.

Here are the differences;

1. AGD has the vibration sensor mounted in the housing, PTP has it built into the mounting bracket.

edit: the PTP's vibration sensor must plug into the warp feed housing, where the intellifeed cable would go. The AGD unit therefore has a vibration sensor back-up in case of the gun's battery/electronics failing (God forbid!) With the PTP Warp, you have EITHER vibration sensing or intellifeed, with no redundant system back-up.

2. PTP mounting bracket is a 2 piece unit, while AGD's is 1 piece. The 2 piece allows for more adjustability.

3. AGD's has a plastic power feed adapter, with a long & short parabolic feed plug, while PTP's has an aluminum power feed/vert feed adapter. (the one you'll need for your eMicro) PTP's also comes with 2 aluminum screw in adapters to replace the vert feeds on Angels and Bushmasters/Defiants.

4. PTP's also comes with a CP hopper insert which expands the hopper's neck to fit tightly in the warp's body (sadly, they give the black one, which is larger than the blue one CP makes, it's too big for my revy)

5. AGD customer service is second to none. PTP's sucks!

Both units come with all mounting hardware. The new PTP units have the same type (gray) hose as the AGD ones.

If you call AGD and ask, they will more than likely give you an interface cable, free of charge!

As far as sensitivity, I haven't noticed much difference. BTW both of my warps have been modded to use 2 9v batteries in parallel. (9v w/twice the run time)