View Full Version : ULT in retro valve
ridn3wheel
01-14-2004, 12:32 AM
i have a retrovalve and i hear the ULT wont work in it and i hear it will but will work better in the X-valve. i thought the x valve was only ligher. i have a lv10 bolt too... please insite...
Hexis
01-14-2004, 12:34 AM
There is a slight difference in the on/off area between most ReTro Valves and the XValve. The XValve on/off has a two o-ring top (more importantly the valve has room for the two o-rings). The ReTro on/off only has the inner o-rin on the top, since the space for the on/off is steped in on the top. The extra space in the XValve is required for the ULT.
ridn3wheel
01-14-2004, 12:43 AM
so it wont even fit?
Dayspring
01-14-2004, 01:28 AM
It's a possibility.
Only way to tell is to look at your valve.
Take the on/off assembly out. If you see one oring, it won't fit. If you see two, it will.
ridn3wheel
01-14-2004, 01:41 AM
i have a retro on/off that looks like this will it work? i dont understand..
danheneise
01-14-2004, 12:07 PM
as dayspring said, take the on/off assembly out, look into the on/off chamber and see if there are two o-rings. looking at the on/off assembly won't help much.
ridn3wheel
01-14-2004, 02:23 PM
i only have 1 o-ring as on top o fthe on/off assembly
Dayspring
01-14-2004, 02:39 PM
Then you'd have to get your valve milled to accept the ULT.
Otherwise, you can't use it in your current valve.
ridn3wheel
01-14-2004, 06:29 PM
well how fast does the ult recharge? pressure/speed how fats is it actually able to shoot. i have a 68/4500 flatline tank and intelliframe.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.