PDA

View Full Version : ANS Reactor, ANS Valve, RT Piston regulator



tyrion2323
02-05-2004, 10:21 PM
Hi guys, I was browsing 888paintball, and these three items came up:
ANS Valve (http://www2.888paintball.com/product.asp?plid=PARTS&icid=AIRGUN+DESIGNS&scid=AFTERMARKET&csid=974760902702643838702522554469626559753684327 80812&code=08%2D3%2DANS+A%2FMG+PH3+VS)

ANS reactor (http://www2.888paintball.com/product.asp?plid=PARTS&icid=AIRGUN+DESIGNS&scid=AFTERMARKET&csid=525984363627092491220895207238488974644977328 44706&code=08%2D3%2DAGD+A%2FMG+RCT+VL)

RT/Emag Piston Regulator assy. (http://www2.888paintball.com/product.asp?plid=PARTS&icid=AIRGUN+DESIGNS&scid=AFTERMARKET&csid=719681412090020805256021124515952364029241398 04489&code=08%2D3%2DA%2FMG+BDY+RAIL+0)

Can anyone tell me about these?

Jacob

NJPaint
02-05-2004, 10:35 PM
Stay away from anything not made by AGD, simple, but effective rule of thumb. Tom Kaye made a gun that works, the other garbage in the market trys to tag onto his design, but effectively does nothing.

athomas
02-06-2004, 05:37 PM
Tell you what. I'll charge you half as much and send you nothing. But you'll be better off in the end and it will cost you less.

The ANS parts do nothing for your gun.

Bulldog
02-06-2004, 07:27 PM
Interested in hearing the same opinion from a third person?

I just don't have a snappy response is all...;)

yeahthatsme
02-06-2004, 07:33 PM
not to mention it'll void your warranty

RRfireblade
02-06-2004, 07:38 PM
Just be different.......

The Reactor came at a time when AGD was changing the on/off assembly to the current higher flow version and was an attempt to improve flow and add trigger feel which for the most part it did.Since all Valves have the newer,improved on/off,it currently offers no gain over the stock.

The Valve went along with mods similar to the 8 hole mod which as also an attempt to improve flow over the stock valve,and lower Op pressure.There were some occasions where the air port from the Reg to the dump chamber on the stock valve didn't line up perfectly and these were mods to rectify that as well.The current production valves have long since corrected any possibilty of that so those mods are also not needed.

Add to the questionable quality control of ANS and you have a potentional for more harm than good in either case.

Jay.