Valve not recharging

[Nick1Shot]

My dad has been having prob's with his Emag. He got it used but very new at the IAO. He thought it was a bolt stick, and granted, his LX is VERY tight...but I traded his valve w/my friends XValve and same problem. The board has juice, and when the rail is off, and I hold the sear, it fires like mad...so it's not the solenoid/board. The Valve/LX is fine in mech mode...it's only in electronic that there is a problem. Could it be the sear isn't tripping the On/Off pin, and why? Is the solenoid not making the connection, and why?

Thanks for help anyone,
Nick
1Shot

nick.vest@1shotprod.com

[Duke of Lawnchair]

Make sure the on/off pin is the same one out of your father's emag.

Check that the on/off assembly is using the quad oring. Check some of the previous threads in the 'tech forum as I started one in regards to an emag anomaly.

Jim

[-=Squid=-]

Sorry to be off topic... but did you get the last email I sent you?