Gun Apraisel

[member#10,261]

I think I spelled apraisel wrong?

Anyway...I think a lot of people ask how much a gun is worth so maby someone should start a thread for just that purpose. Like if there is a trade you are not sure on you can just go there insted of starting a new thread. Or maby I didn't get enough sleep ladt night. Well I have a question...How much do you think these cockers are worth, like re-sell value...

Heres what it's got: Custom milled Vertical body w/ angel threaded feed tube, Works hpr, Works ram, Works 3-way, Works swing frame, stainless high flow evil valve, Works delrin bolt, Dye stickies, homemade volumizer, Works mid-rise feedneck, Dye cocking knob, Palmer Rock lpr, Shocktech drop w/ cp on/off
http://www.koolaidacidtest.com/images/cockerright1.jpg

and the other one...2K1 Autococker (black)--Shocktech Supafly Bolt (delrin)--ANS JackHammer LPR (silver)--ANS 3-way (silver)--ANS Ram (silver)--Pneumatics has kickass PINK hoses!! (gives the gun uber-flow!! lol)--Freak barrel back (black)--Dye trigger frame (silver)--Dye stickies (black)--2K1 A/C reg (could get a WDP speed minireg if deal is good enuf)--New rods and hoses--New trigger shoe (silver)--New cocking rod--Beavertail (chrome)
http://us.f215.mail.yahoo.com/ym/us/ShowLetter?box=Inbox&MsgId=8475_241359_4515_1339_28741_0_509_42082_2157 947736&bodyPart=2&YY=83214&order=down&sort=date&pos=0&view=a&head=b

[member#10,261]

oops pic didn't work :(

[AzrealDarkmoonZ]

Two quickies..

Why two LPRs and the LPRs pictured are : Rock and STO One not a Works.

[member#10,261]

I know nothing about cockers...these are the guns I would receve, and just sell as soon as possable.

M

[barberjohn]

Originally posted by AzrealDarkmoonZ
Two quickies..

Why two LPRs and the LPRs pictured are : Rock and STO One not a Works.
i believe that is a mod that lowers the cocking pressure to about 15 psi, but i forgot who made it. i would probably pay about 450 for the first, and then about 375 for the second.

[member#10,261]

soooo you think i could sell the first for 300 and the second for 200 priddy FAST?

M

[punkncat]

Don't know.The market on mechanical cockers is pretty low right now.
It still cost around $400 to put an eblade on one.You can buy a brand new stock one for $350, and they need very little.
I have seen some older(pre2K)cockers outfitted with aftermarket frames,new regs,ram,etc going for around $150.

Don't pay more than half what it cost new unless its in pristine condition.

[FallNAngel]

Originally posted by barberjohn
i believe that is a mod that lowers the cocking pressure to about 15 psi, but i forgot who made it.

If you're thinking of the Gemini mod where you have separate cocking pressure for open and close, that's not it. The 3-way on that only had 3 barbs

[barberjohn]

huh, then i dont know what it is. oh, and punkncat, the first cocker isnt exactly old, it is vert feed and custom milled. it also has some very nice components on it, and as long as it works, it should be worth around 400. i need a pic to do a real appraisal on the second one.

[member#10,261]

he sais it is a low pressure chamber that lowers some pressure...somewhere. It was proffesionaly done. He offered to take it off, and put everything back where it is soposed to be. Thanks for the help guys...keep it comin

M