PDA

View Full Version : New automag RT


Wyno20
03-12-2004, 07:56 PM
I just ordered a automag rt and wonder if there is any way i can take off the chrome sight rail and the other chrome side rail when i use it. i don't like the color so i want to know if anybody has taked them off and if its okay to use then
Dayspring
03-12-2004, 08:14 PM
Well, the sight rail on the back end is held on by 6 screws in the rail. That's easy. Just take them out and off.

What other rail are you speaking of?
Wyno20
03-12-2004, 08:17 PM
there is another chrome plate on the sides right next to the foregrip and i don't know if it needs to be on for the gun to work
Dayspring
03-12-2004, 08:18 PM
Well, that actually holds the foregrip on. If you want the grip, that has to stay.
Wyno20
03-12-2004, 08:20 PM
there is no way to take that off or replace the grip with another grip
DeerChaser
03-12-2004, 08:24 PM
Yes you can take it off. You say new, I assume it's an RT Pro. The rail is pre drilled (one hole) I mounted mine with one screw thru the pre drilled hole.
Wyno20
03-12-2004, 08:42 PM
Deerchaser, so you are saying i can take both of the chrome sight rail and the chrome plates by the foregrip off the Ule RT and the foregrip will still be connected to the gun
DeerChaser
03-12-2004, 08:47 PM
you have too remount it to the rail
this (http://f1.pg.photos.yahoo.com/ph/deer_chaser/detail?.dir=/d5d7&.dnm=8155.jpg) too this (http://f1.pg.photos.yahoo.com/ph/deer_chaser/detail?.dir=/d5d7&.dnm=2a91.jpg)
Wyno20
03-12-2004, 10:31 PM
Deer Chaser, that gun is sweet, what kind of hoses are those and did you get them from a paintball store
DeerChaser
03-12-2004, 10:45 PM
Thanks, that is stainless steel rigid tubing that I custom install. You can't buy it pre bent. The fittings are around $10 each, has a psi rating at 10,300 working pressure. The tubing is 1/4" OD.
tonybhall
03-13-2004, 09:13 AM
Hey Wayno,

Check out the custom work done at www.logicpaintball.com

They will mill out your rail (drop 65% of the weight) and put a slot in the rail for your foregrip. Cost around $45.00.

I have the same marker, you will love it once the ULT breaks in.

Bryan
Phantom Regiment
Team Mag Daddies
Smittythemaster
03-13-2004, 09:17 AM
can the new RT ULE custom foregrip be switched with an old style foregrip (one with the finger grooves) without any modifications?
tonybhall
03-13-2004, 09:39 AM
The top of the new grip is an verticle adaptor just without the pin. Just unsrew the grip and as long as the new grip will screw into a vert. adaptor you should be ok

B-)