Anyone HAPPY with their gun?

[RenagadeOfFunk]

...I see all these people upgrading and updating...
...I just wanted to know if any of you are happy with your set ups...
...pics are welcomed :)

[252]

EDIT:
Picture (http://home.comcast.net/~lcoulter/Images/ULEMag.JPG)


All i want is a black X Valve...

[Fred]

I'd post pics, but I'm waiting on some parts... :)

basically I love my warp-ule'd retro... its my first mag... and the only things left to do to it are:

15* ASA- Somewhere between Alaska and Detroit hopefully...
ULT On/Off- as soon as I scratch up the $$...
Barrel kit... still researching which one I want.

---Fred

[angelbeast24]

im very happy with my setup right now i have a dye matrix with with halob and 91/4500 macdev conquest and a few upgrades such as ccm no rise,and free flow trigger the only thing that im goin to put on it is a evolve bolt kit and im done

[Chronobreak]

how dare you say you can be content with just one setup and yes im happy with mine for know....

[swanster]

i am very happy with mine, since i'm only 14

iv'e got

storm edition cnc x-mag black to yellow fade
evil pipe barrel set 12"
marksmann rail
air america black to yellow fade 4500/1.1 abaddon air system
yellow warp feed ( not used much anymore )
black empire reloader b

storm edition cnc x-mag black to yellow fade
evil pipe barrel set 12"
marksmann rail
air america black to yellow fade 4500/1.1 abaddon air system
yellow warp feed ( not used much anymore )
black empire reloader b

red angel lcd ( 2k1 )
black angel air system 4500/1.1
dye ule 14" barrel
silver gated feed
12v revolution with x-board
a huge amount of upgrades put in last week

[-=Squid=-]

I have owned a lot of different gun setups, but finally I can truthfully say I am happy with it. Its fast, good looking, doesnt chop, ultra low pressure, backed by an awesome company, EXTREMELY efficient, etc... you guessed it, I have a 2004 viking. :)

[punkncat]

My markers are never finished.Its not really a matter if being unhappy with them , its just I get bored and need something to tinker with and waste money on.....

[Torbo]

my cocker. hmm. I guess id be way more happy with it if i had anothe gun too. By that i mean, its an amazing backup and i love it but need a new gun. It could use some relativly minor things like a clamping feedneck. Anyway, i am in no way satisfied with my primary setup, because i dont have one.

[PzYcO]

oh my god, i got my last part last night and i took it out back for testing and it RIPS and looks great too! you've probably seen it somewhere else recently but here it is again :p
http://dex.coldsteeldesigns.com/dvo/mitchgun.jpg

[NJPaint]

For the last 2 years I've gone through 14 different guns. Started with a Tippmann Carbine 68, right now I'm shooting an e-mag and have a classic in pieces next to me. The e-mag is the first gun that I am seriously considering keeping. Its all I wanted in a gun and a lot more.

[Ratzo]

I'm happy with my marker right now but companies are always bringing out new products that you just have to get.
Current setup:
MicroMag with X-Valve
12" BOA Xpress
Mini drop with on/off

Waiting on the compleation of Rogue Vert frame.
Then maybe a ULT.

[Sparq]

http://www3.sympatico.ca/reids/myPhantom1.jpg

:D :D :D

[afrankart]

:D :) :D :) :D
http://www.jayloo.com./lib/get_file.php?id=1355

http://www.jayloo.com./lib/get_file.php?id=1337

[Digits]

I don't think I could ever be happy with any gun I owned.. I like shooting other peoples.. I do like mine.. But the only gun I think would be perfect to me would be maybe a dm4, or something similar.. but I still don't know.. I get bored of a gun after about a week

[Alux]

http://www.teampraxis.org/lasoya.avi

http://www.teampraxis.org/images/lasoya.jpg

Im very happy with it.

[Ov3rmind]

I really like my Viking a lot. But for some odd reason I think I'm destined to own an LCD Angel. It's just that they fit my hands like a freakin' glove, and I'd be willing to lose a little performance for that.

[James]

i am happy with mine but need a few more things done to it.
http://www.anythingcars.com/rides/photos/si_bat/Picture%20241.jpg
http://www.anythingcars.com/rides/photos/si_bat/Picture%20242.jpg
http://www.anythingcars.com/rides/photos/si_bat/Picture%20243.jpg

[RRfireblade]

This one's completely done.....

http://www.uploadit.org/rrfireblade/Dcp_0001.jpg

The XMAG is completely done but I don't have an updated pic,here's the old pic with out my new trigger and custom grips....

http://www.uploadit.org/rrfireblade/MyXmag.jpg


And 3 of the other 4 are pretty much done.After the last one comes back from Anno,I'm taking a long deserved break from throwing endless cash at marker upgrades.;)

[Mindflux]

http://forums.dubdriver.com/modules/gallery/albums/album05/DSC00269.jpg

These are both pretty much done minus the Fireblade for the Xmag, which is sitting right here waiting to be put on.

[Cryer]

Jay, I'm usually not one for purple stuff... but um, if you ever want to sell that thing...;)

[RRfireblade]

Originally posted by Cryer
Jay, I'm usually not one for purple stuff... but um, if you ever want to sell that thing...;)

:D

Thanks. I've considered selling but for some reason my seems to think it's hers. Silly girl.;)

(mean when she's angry too :eek: )

[Lord_Whoopass]

I am content with my SFL and my Crusader viking... dont plan on changing a thing to them... With my mech mag however I do plan on getting Rogues Electronic vert frame w/ snatch grip or maybe NiCad's hair trigger on rogues vert frame... I still do whore guns around though... but not these beauties...
http://www.angelfire.com/freak2/hedpaintball/mrsfl.jpg
http://www.angelfire.com/freak2/hedpaintball/JMJViking.jpg

[Cryer]

Every mag I've owned, I've been very happy with.

My diggers Mini: (thats not my drop!:p)
http://www.automags.org/forums/attachment.php?s=&postid=830253

My ULE Mech. (I think this one was my fav so far... I miss her)(side note- some parts are currently on Whoopass's mech mag above...)
http://www.automags.org/forums/attachment.php?s=&postid=949170

My Teq fade Emag: (loved the emag, just not a big fan of the orange in the fade... If only it was all red or red acid...;))
http://www.imageshack.us/img2/3502/emag7.JPG


Currently, I'm trying to negotiate a deal for another sweet emag;)

[davidnj]

I think Im destined to never be happy with any one marker I have. I always like to tinker with it and try (though I sometimes fail) to improve its performance to a level Im happy with...then I hit that point and start over with a new marker.

My mech mag is almost where I want it to be. Im waiting to see how the hAir trigger works out. If I dont swap that for my intelli I'll probably order a rogue grip because I like the look better.

My cocker is mostly stock, only added a drop and a new regulator. I don't really shoot it much, mostly let my brother use it. While I prefer mech guns Im thinking of adding the e-blade trigger frame to it.

Have another mech mag that Im building for my other brother. Omega rail, ule body, xvalve, stock trigger frame. Waiting again to see which frame I like best before I put a new one on this marker. At the least it will have the i-frame.

Have yet another mag built out of spare parts (minimag body). That mostly gets used if somebody has marker issues or is a first time player with our group so they dont need to rent. It still amazes me that my ule mech mag started out as a standard minimag.

Have a tippman 98 that I bought and upgraded a bit since they're kinda tanklike and Im confident that when we have more than 1 non-marker owner with us they can use it without issues.

Finally have a cheap spyder that was my very first marker. Its essentially unchanged, just replaced some o-rings and springs so that on the outside chance all of my other markers fail this one is there to use.

have a friend with a metal working shop, Im going to start going there after the shop closes to learn how to maybe make some of my own custom parts.

[LudavicoSoldier]

I LOVE my ULEX RTP! By far the best gun I have ever owned. I have to say that a level 7 PF mag and level 7 Classic mag were my first two high end guns, probably around 6-7 years ago. All I need is a gloss black wingless RogueRail cut for a warp right ULE body and I'll be golden. I also need a black quick disconnect Datapimp Flatline drop and am waiting for a black RTP foregrip bracket from ClassicMagger. Check it out UPDATED PICS!

http://idisk.mac.com/dgreening/Public/warpmag1.jpg

[NoForts4Me]

Hey RRfireblade, how does the trigger feel on that mini? I've seen those, but never heard how they perform. Marker looks good, btw.

[RRfireblade]

Originally posted by NoForts4Me
Hey RRfireblade, how does the trigger feel on that mini? I've seen those, but never heard how they perform. Marker looks good, btw.

Thanks,I like it a bunch.

Stock,it's softer than an intelli but firmer than the typical Benchy.With the added ULT and a modded sear it's just plain "short and sweet" ;)

The pull is about half of the space you see between the trigger and the stop, ~1/8" and light enough to walk....slowly. ;) But pretty fast overall for a mech.

Jay.:)

[Sir_Brass]

http://mercury.pr.erau.edu/~robere31/pics/Blazer/blazer3_web.jpg

I'm VERY happy with my baby :D. However, I still have several more things to do to her:

-replace the shocktech d/f
-put on/off on the anti-siphoned CO2 tank.
-get an NW d/f
-put a 2nd stab on blazer and use it as the bottomline/2nd inline reg
-put a new guage on the male stab
-have custom wood grips by shartley made for the 2x frame.
-get delrin flatrings for the bolt

[Rather]

I AM happy wiht my guns. I tried upgrading my 98 custom but found out im happiest with it when its nearly stock (except bigshot and AK hopper) and a stubby 16 oz tank. My mag is a bit diff... I like it. But i don't like the feedneck and elbow, or how the tank works on it.

It looks somewhat like this now. Mag currently (http://www.automags.org/forums/attachment.php?s=&postid=1218093)

I'e been toying with the idea of making it eventually look like this, somehow...

Pic1 (http://www.jayloo.com/lib/get_file.php?id=1615)
Pic2 (http://www.jayloo.com/lib/get_file.php?id=1614)

[RT pRo AuToMaG]

Right now I have an ALMOST perfect setup, only problem is that it cannot be used until it is anodized, and it cannot be anodized until I get all my parts :(

Demon UL Milled Matrix (similar to ironman)
FF one piece open face 2ms bolt
FF Backwall
FF Bolt stop
FF Backplug
ND ACE breech
Eyes
Dye backplate
ND ASA with guage ports
AKA Sidewinder
Aardvark Alligator Trigger
Tadao V4.0 board
ND Breech knob
CCM mid rise
Dye 03 Matrix stickies


Items still needed/wanted:
AKA Soda Can Mod
Leethal 2 mod
Custom eye covers from Demonguns
Hybrid 50/50 Trigger frame
CCM No rise
Get stripped screw out of manifold (sad story)
Ano job from xpb

Should be useable by June and fully upgraded by August

[RenagadeOfFunk]

UP!

[synergy]

Originally posted by Mindflux
http://forums.dubdriver.com/modules/gallery/albums/album05/DSC00269.jpg

These are both pretty much done minus the Fireblade for the Xmag, which is sitting right here waiting to be put on. HOW DID U PUT AN ANGEL SPEED FRAME ON YOUR MAG PLZ LET ME KNOW MY EMAIL IS synergy_paintball@hotmail.com

[synergy]

Originally posted by RRfireblade
This one's completely done.....

http://www.uploadit.org/rrfireblade/Dcp_0001.jpg

The XMAG is completely done but I don't have an updated pic,here's the old pic with out my new trigger and custom grips....

http://www.uploadit.org/rrfireblade/MyXmag.jpg


And 3 of the other 4 are pretty much done.After the last one comes back from Anno,I'm taking a long deserved break from throwing endless cash at marker upgrades.;) the lavender one is kick *** better if more colors but sweet man:) :) :) :) :)

[Cryer]

Thats not a speed frame:p

Thats a logic vert frame.

www.logicpaintball.com

Also, RogueFactor is coming out with one soon that actually has a safety.

[ramennoodles]

mine is good i just need an x/retro vlave and i'm set and my tank back from hydro.

[can'tthink of1]

I've been through a tricked spyder, a tricked tribal, and now this ebladed cocker, I'm still not happy :( I'm no looking into vike's and maybe e-mag, but then again the price to pay for these "high-end" markers is kinda steep. I may just be buying a phantom, and hanging on to my egg and crossfire nitro tank incase I find a marker I like...

[tyrion2323]

I'm PERFECTLY happy with my Omen!
http://www.elementpaintball.us/Gallery/Omen.jpg

Soon to come:
KAPP Reflex Milling
Lava acid wash
Skyforce Drop

[CoolHand]

I've always got 7-15 markers laying around here that I'm working on (for customers or myself), but there is one marker that I never touch.

My FreeFlow cocker is perfect. I never touch it, just add gas and paint at regular intervals.

Its my work horse, the marker I play with most of the time, and thusly, the one I leave alone. :D

Here it is:

http://www.logicpaintball.com/FreeFlow.jpg

[PRPB]

Yes I.m very happy with mine, but I have some stuff to do to it.


http://mywebsite.register.com/db5/00459/blackoutpaintball.com/_uimages/Emag.jpg

http://mywebsite.register.com/db5/00459/blackoutpaintball.com/_uimages/E-mag001.jpg

[Gadget]

I'm very happy with mine. The parts I've added to replace stock parts so far are:

X-Valve (for weight - already got ULE frame + rail)
ULE body (for weight + centre feed + cocker barrels)
CCM clamping low-rise (for halo compatability + looks)
Macdev Sonic detent (stock AGD one kept getting stuck + looks)
3.0 software (speed)
Powerlyte Scepter kit (paint sizing)

http://www.chimpy.com/pics/pball/guns/emag.jpg

Played a tournament at the weekend and it was perfect all day long - great consistency over the chrono, fast, accurate and not one break or chop.

I have to admit that the two tournaments before that were a nightmare though - first one due to huge paint + me only having a .688 Ultralight (now solved by the Scepter) and the second due to my Halo doublefeeding constantly due to a sticky detent (now solved by a new detent and reverting to my Revvy).

Only remaining changes I've got planned are to install a Fireblade trigger (looks and comfort) and to replace my ghetto rail-drop with a gloss black Macdev rail (purely looks), then she'll be complete :)

Have turned down the option to get an Angel A4 or Angel Fly because I like my E-Mag so much. :D

[Korrosion]

i voted yes i'm happy because i dont think I'll ever get 4.0 :mad:

[kscullin]

I'm a tinkerer, so I'll probably never actually be done. However, I am happy with my setups at this point - they're as much marker as I can utilize at my skill level.

Check my sig for pics.

[RenagadeOfFunk]

Originally posted by Korrosion
i voted yes i'm happy because i dont think I'll ever get 4.0 :mad:

I went to AGD yesterday to get a checkup...and Jon said 4.0 is on recall...or something to that extent...

[Chris42050]

Originally posted by Korrosion
i voted yes i'm happy because i dont think I'll ever get 4.0 :mad:
Im not trying to bust your paintBALLS but your emoticon doesnt look very happy.

[JT2002]

u see bro the thing is, this is a hobby. u know what that means?

your wallets, or for some of us, your silver ultra platinum diamond max Airline miles credit card MAX...

is the ONLY limit :D :) :D :D :D :rolleyes: :D

[845]

Its not that I am not happy with my guns its just I need to have MORE!

[barrel break]

well, I LIKE my gun (03 cocker with JAM bolt and JJ ceramic) but there is a hell of a lot more i want/need to do to it....
I am not satisfied

[RtDaNiMaL]

nice guns guys
my camera isnt working right now so i will have my guns up soon
my rt pro is in my sig (just an x ray)

[xTinkt]

/edit

damn .. not happy at all

[RenagadeOfFunk]

TTT

[pballa2k4]

i am satisfied with my warped emag all i want is a lvl 10 i dont worry too much about weight savings that is kinda lame to spend so much money on. i love my emag. HOLLA agd

[Wes Janson]

Personally, my only real desire for my gun right now is to get the damned thing reliably functioning, with zero leaks, ever. Beyond that, at some point in this distant future I might want to look into constructing a flatlined ULE emag.

[bleachit]

I am happy with my non-stock spyder victor, which is what I used exclusively 2 saturdays ago. However, I am not happy with my 68 mag right now. basically I spent too much for what I got and upgrading it would cost too much. But I am not passing complete judgment on it until I can play a full day with it and see how it works out.

[AGDlover]

http://users3.ev1.net/~generic0/code/ALmag2.jpg
the set up: TKO automag
12" dye UltraLight
egg
lvl10
intelliframe
warp feed
deadon bullet drop
48/3000 PE tank
Omega Foregrip(not shown in pic)
The next things and I'm perfectly happy:
Warp ULE right body
New Cocker threaded ultralight
Xvalve
and maby a Logic rail

[AGDlover]

Originally posted by Sir_Brass
http://mercury.pr.erau.edu/~robere31/pics/Blazer/blazer3_web.jpg

I'm VERY happy with my baby :D. However, I still have several more things to do to her:

WTF is that :confused: :confused: :confused: :confused: *tilts head*

[bleachit]

I believe its a palmer's blazer.
http://www.palmer-pursuit.com/

[127.0.0.1]

I'm not happy with my fully tricked trix and speed...

[ReTro Boy]

Dang you, AO!!!

I WAS perfectly happy with my Champaigne iR3, but now I want an x-valved, logic framed, hAir triggered, warp fed RT Pro. You people SUCK!!!!

Didn't someone have a mag that was milled to look like an Angel? Where can I find that?

[Cryer]

Originally posted by ReTro Boy
...Didn't someone have a mag that was milled to look like an Angel? Where can I find that?
Last year at the Austin AO, Nicad had his hAir setup installed in an Angel LCD frame with a Dallara body. Might be what you are thinking about...
http://www.jayloo.com/lib/get_file.php?id=290

[Mag89]

I am very happy with my mag I just want to put a hAir trigger on it

X-valve
LvL 10
Intelliframe
ULT
Dye Ultralite Barrel
Ricochet AK
4500psi 45cu nitro tank

soon to come: hAir trigger

[Strider]

Heck yes!

http://www.thestrider.com/Paintball/2003-08-10_Emag.jpg

[TraXeR]

Strider: Why not just put shrink wrap on your hose? Electrical Tape works too I guess, just a suggestion.

[Cryer]

I have to say: I love the blue grips on your tequila fade emag. Amazing!

[Lohman446]

I'm very happy with my current primary gun

ULE E-mag
3.2 Software
X-valve
Black VCG milled rail
Shocktech mini-drop
Halo-TSA
Warp ULE body
Warp fed
Crossfire 68/45

My backup gun performs perfect for me too, it was my primary last year
UlE mechanical Mag
Vertical feed
Ricochet hopper
ULE trigger, Intelli-frame
Crossfire 68/45 tank


Basically I have nothing more to do to them, so now I have project guns - seems how my team has threatened me with my life if I don't quit tinkering with those guns so taht they are ready to go - basically I spend a half hour before every day resetting anything I did to screw them up the week before.

My "toy" gun is
Minimag, powerfeed right (warp left :) )
Currently out being powdercoated bright yellow
Currently stock trigger (to be upgraded to Intell)
Minimag valve (to be upgraded to X)
Big drop
91/45 tank

And building a super Spyder, or having built, think Milenium body, ACE, fast and bouncey - have seen them attain over 20BPS.

[can'tthink of1]

Actually at one point I hated my tribal, and now I love it an am keeping it, now I just need to get some upgrades for it.

But once its done I don't know what I will do...

[Blazingace]

I am happy with all my guns. I am just never happy with only the ones that I have.

[RenagadeOfFunk]

UP TTT!!!


im back from Spring break and waiting for my Custom parts to come in :cool:

[68magOwner]

this is an old pic,
setup-
2k3 imp
black stock body (only thing i dont like that probably wolnt change)
evil respirator
ND internals (ppl say dont mix evil and nd, but it works great for me)
ND bolt
ND blade trigger
Progressive (soon to be some kind of kit, or large bore barrel)
custom lazer engraving
some nice grips (not the ugly blue/green ones pictured, those were never mine)
horizontal max flow
68/3k crossfire
reds tank cover
apache
non-vision cricket

i am very satisfied, i just want WAS for more speed.
edit-wow, what a old ugly pic, huge too, sry, better ones coming

[JoyInTheMadness]

I will be once I trade, angels arn't my style but a micro-emag is :0

[member#10,261]

I am happy with the setup comming in the mail...

Its Already Got:
- ND Ti Pull Pin Flat
- ND Equalizer Delrin Bolt
- ND Slick Shaft
- ND RIP Valve
- ND SS Rat Hole Hammer
- ND Hammer Asembly
- ND High Flow Front Cap
- ANS Jackhammer II LPR
- Everything Else is Stock
Immeadietly Adding When it Arrives:
- ND Magno Trigger
- CCM Midrise Feedneck
- CP Flame Drop
- SP On/Off
And Probly With Graduation/PayRase Money:
- OTB Vert Frame
- CP Inline Reg
- Empire Barrel Kit
- and WAS or ECS depending on rase ;)

http://www.hunt101.com/img/136069.jpg

[Strider]

Strider: Why not just put shrink wrap on your hose? Electrical Tape works too I guess, just a suggestion.Heheh, yeh, it's on my list of things I should have already done. :p

[Flossabe]

Here are my changes so far, and I dont think that I will ever be done with it that is part of the fun for me. I relly want to get an x-mag body and a ULE grip frame. so if any one has one for sale ;)

[RenagadeOfFunk]

...nice gold ptp e-mag...not too shabby... ;)

...I never really liked ptp e-mags...but that one looks pretty decent (compliments on the gold-silver)

[shivors]

Ok...I realize most of you will roll your eyes but I am very happy with my Spyder Electra DX. The only downside is I out shoot the reloader but I wont buy a $150.00 Reloader B for a $200.00 marker...just need to reign in the fingers of DOOM...DOOM I TELL YOU!!!!

http://www.sfssquad.com/images/temp/electra_dx.gif

[Kevmaster]

couldn't be happier....

i own an excellent X-Mag and I own a Warped LCD Rainmaker.

how could life get better? Oh, yeh, a Warped LCD Stingray I have in the works :)

[RenagadeOfFunk]

...up...come on...i want more votes on the poll :)

[Cryer]

Here are my changes so far, and I dont think that I will ever be done with it that is part of the fun for me. I relly want to get an x-mag body and a ULE grip frame. so if any one has one for sale ;)

Flossabe-


Personally, I think its about time for a re-anno...;)

Have them match the pewter of the valve and fade it to black at the front.

Before:
http://www.automags.org/forums/attachment.php?attachmentid=69882&stc=1

After:

[RenagadeOfFunk]

...sweet :)....



Originally Posted by Flossabe
"... I relly want to get an x-mag body and a ULE grip frame. so if any one has one for sale "

...AKA...i want an X-mag :rolleyes:

[the larch]

well, really...what else can I do to it? Blue warp body to match rail? Custom Deadlywinds trigger?
http://www.jayloo.com/lib/get_file.php?id=2477

[RenagadeOfFunk]

...my thread...my ups (10 words my AS-...oh i made it :))

[ERut]

well, really...what else can I do to it? Blue warp body to match rail? Custom Deadlywinds trigger?
http://www.jayloo.com/lib/get_file.php?id=2477


AH! Make it not ugly... nice q- loader though.
I think I'm one of those people who won't be satisfied with anything. Of course it probably doesn't help that I saw some one buy and sell like three highend electros since I last played.

[Evil1]

I am happy with all 3 of my guns right now. My emag and 03 shocker are constantly used in rotation and both guns are awesome. I really love both of them. My RTP with warp feed I mostly use for woodsball or for a backup. I used to use my warp on my emag when I played in back, but now I have been playing front alot and the warp actually got the way for me. I know that may sound dumb to some but I actually did better without it up front. I have recently been toying with the idea of putting the warp on my 03 shocker, but I want to get a custom warp bracket. If the idea ever gets off of the ground, I will try to post pics if I ever get around to actually figuring out how to post pics. It has been explained to me a million times but I need someone to show me.

[Smitty2k1]

Im 100% satisfied with my mag. Which is the reason I bought it pre-upgraded Tunamanstyle. Only thing I MIGHT ever change is a new anno job (which would require me to swap some SS parts for Alum. parts) And MAYBE the hair trigger when it comes out. And MAYBE a halo just for looks.

However, I am 0% satisfied with my game. I have played ONCE all year. Not because of schedual problems but because of money :(

Ah well, summer in three weeks and Ill be working full time + umpiring little league baseball.... $$$

[joez]

Im happy, but that doesnt mean that im done. The E-mag, I still have some more carving and milling to do, along with getting a body that is actually supposed to be on there, and a board flash when 4.0 comes out, yada yada.

The tribal, i love it, but at the same time, it just needs more. As its set up now it has great consistancy, it cooks when you get on it, but i want more. Hence the Angel vert frame that i have waiting to put on, the LPRC which will arive when it gets finnished, and then i will probobally take it into the machine shop and see how little i can make it. Hopefully i can get the LPRC and the Space Frame installed before Illinois AO 5.0.

[RenagadeOfFunk]

...I was ALMOST happy...i planned on more ULE stuff....(more specific...alll ULE)....but im selling this beast for $900...and getng me an ALias (1.4 lbs...i cant wait :))
http://www.jayloo.com/lib/get_file.php?id=2555
http://www.jayloo.com/lib/get_file.php?id=2554