PDA

View Full Version : ULE Bodies and Rails


Cheat71
03-29-2004, 10:58 PM
I am looking into buying a ULE body and intelli frame although I know the intelli will fit on a classic rail but will a ULE body fit on the stock rail? If not what is an inexpensive rail that the ULE body will fit on?
Dayspring
03-29-2004, 11:14 PM
Body will fit just fine.
Cheat71
03-30-2004, 05:47 PM
i know that the ule's take cocker threads so when i install my rail to my ule body should I removed the twist lock nub thing?
Eric Cartman
03-30-2004, 06:09 PM
i know that the ule's take cocker threads so when i install my rail to my ule body should I removed the twist lock nub thing?

Yup. You'll have to knock out "the twist lock nub thing" :) for the ULE body to fit on the rail.
Cheat71
03-30-2004, 08:39 PM
is it easy to take it off? ( the twist lock)
Dayspring
03-30-2004, 10:59 PM
Turn the rail upside down.

Smack the brass piece out of the rail.
ClouD
03-31-2004, 01:50 AM
hmm i had a hammer, i hit it real hard, it wont budge. any suggestions?
Dayspring
03-31-2004, 01:53 AM
Bigger hammer. ;)
Cheat71
03-31-2004, 03:34 PM
if you hit it real hard wouldnt the rail crack?
Dayspring
03-31-2004, 03:41 PM
Nope. It took me half an hour to dremel the damned thing. Cracking should be the least of your worries. I'd be more afraid of breaking the hammer.

A good way would be using a C-Clamp and pressing it out. Just a thought.
ClouD
04-01-2004, 10:38 PM
hmm... my suggestion, dont bent ther sides of the twist lock when trying to take it out, it'll get stuck for good. also, if you hammer it on sement it damages your rail, if you do it on wood, it damages the woods, if you do it on carpet, the tiwst lock gets bent. so take it from there :D