View Full Version : Bolt stick on LVL10 with some barrels
ghideon
04-03-2004, 12:58 AM
So my J&J Ceramic and my Lapco AS like to give me bolt stick on the LVL10 bolt (the J&J much more so than the AS).
Anyone have any luck taking a dremel with a sanding head to the inside of the barrel? Don't wanna modify the bolt, would rather mess up a barrel that ain't workin in the first place.
Dayspring
04-03-2004, 01:07 AM
It's because you're using a very small bore barrel. The level 10 Outter Diameter is bigger than the barrel's Inner Diameter.
I forget the exact measurement of the level 10 bolt, for some reason I am thinking it's .685.
ghideon
04-03-2004, 01:13 AM
True, I realize that easily enough. Just wondering if I can do something about it.
Aleis
04-03-2004, 04:10 PM
i've had that happen with mine once in a while all i had todo was un-screw my barrel just a little and it unnlocked the bolt. try maybe putting a o ring on the barrel to pull the barrel slightly farther away from the bolt.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.