Rt and Mag with retro?

[LCDmag1]

Is a mag with a retrovalve as reactive as a RT. I am deciding whether i should just sell my minimag and get the new RT's with the intelliframes, or just upgrade my mini with retro and intelliframe.

[agdjon]

yes...Also, if you have a pair of calipers, measure the rt on/off pin and let me know if it is a .750 or .745 inches. call me at the factory but before you call, make sure your valve is registered.

[LCDmag1]

Is it suppose to be one length and not the other?

[FeelTheRT]

ok, here's the deal, techincaly they are the same thing but a but reactivity of the ReTromag will vary from gun to gun. They should come stock with .750...? When i bought a ReTro valve for my Automag, it wasn't very reactive at all so i ordered a .745. It made it a bit more reactive. You could also send your gun into AGD and have them test out each little pin if you want i think.

[jah871]

all u have to do is call in and they will send u shorter on off pins. thats what i did and my gun is very reactive with a .740 plus i have a preset nitro tank at 800-850 so mines really reactive i love it.

[Drewboy_34]

so if you are not happy with the reactivity of you rt then you can just call AGD and they will send you a set of different sized on/off pins ...do you pay shipping and handling or do they?

[FeelTheRT]

hehe, when i had my RT, it just barely bounced with a .630.

[agdjon]

CALL ME AT THE FACTORY FOR THE PINS. JUST KEEP IN MIND THAT REACTIVITY DOES NOT MEAN FULL AUTO OR BURST MODES. THE RT SERIES MAGS (RT, PRO, RETRO, EMAG) HAVE ALL DIFFERENT ON/OFF PIN SIZES FOR EACH INDIVIDUAL VALVE. USUALLY THE PARTS (ON/OFF PINS ONLY) ARE USUALLY FREE AND SHIPPED VIA US MAIL ONLY. IF YOU NEED A PARTS FASTER, THEN YOU HAVE TO PAY FOR SHIPPING. ALSO, IF YOU JUST WANT ONE PIN, I USUALLY DON'T CHARGE FOR IT, BUT IF YOU ARE GOING TO ASK ME FOR A FULL SET, THEN, NFORTUNATELY, YOU WILL HAVE TO PAY FOR IT