Need Help

[kauai_paintball]

Hello, Im in a bit of a pinch. I am custom building a mag rt, and i know all the main componens i want. I just dont know about the details. where will i need orings? do i need plastic nubbins? all that i got on my order list curently are s follows:

Part:mainbody
Ordering:Karta w/ integrated rail
Details: I was wndering if the karta is compatible with inline regulators/LPR's

Part:Rail
Ordering: Karta integrated rail
Details I hope the rail works w/ grips, IE: gasthru/inline LPR kine. (dose the gun need an lpR? if not, what will that help, and will it helpu?)

Part:Valve
Ordering: X valve
Details I dont fittings screws etc know if it needs shims or orings or anything. If i need any thing, pls post.

Part: Bolt
Ordering: X valve
Details: The x valve does include the lv. 10 bolt right? do I need any fittings/washers to use it?

Part: Foregrip
Ordering: unsure
Details: I dont know what to get, i like the look of the inline regs, and they help with efficiency, so thats prob

Part: Gripframe
Ordering:unsure
Details:I want the hAir triggerframe, because... because... well do i really need to explain? but untill it is released (and I own #1) I really want some sort of vert frame, and if possible, and electronic frame.(with modes)

Part: Feedneck
Ordering: Rougeneck
Details: the best there is. and it clamps.

Part: barrel
Ordering: unsure
Details: I dont knwo what is best for a mag. i was thinking a stiffi.

Part: Airlines
Ordering: Macrolines
Details: I dont know what i would need to connect them, like connector wise/ loctite/ fittings/tools.

Part: tank adaptor
Ordering: unsure
Details: I dont know what to get. i want a drop forward. dont they have a built in tank adaptor? otherwise, i dont know

Part: Fasteners
Ordering: I have no clue
Details: I dot know what i need. plastic nubbins? foamies? screws? all i know is that i need the sear kit.

and thats about it. if i missed something just post it, and ill add it. i have never owned a mag, and have never built a mag, and if you know a picture of an exploded view, or a picture gallery of each part individually, pls tell me. Im building an RT mag by the way. ( o yeah, i just remembered! They call rt's rt's because they have responsive trigger. hAir trigger is non responsive. therefore, i Dub thee mags with hAir triggers, HTS mags!, hair trigger system mag.)

KP
And if anybody can help a balla out, i really am on a budget, saying that i wanta go to the new celebrity thing. with mr kaye. So if you can get me a wholesale, that would be awesome.

[WARPED1]

Mags don't need LPR's, it'll probably mess it up.

[Joni]

If you want a vert frame, logic is your only choice right now. Rouge is coming up with something soon, but it's not released yet. I think logic can hook you up with a karta as well.

About lpr/inline reg, you wont need one. All mags have integrated regulators.

[kauai_paintball]

I have to order parts today, and i need to know what to get.b

[yaddatrance]

If you're going Karta w/ a logic completely from
scratch you will need:

1) Karta body and rail
2) Rogue clamping feedneck
3) 2 - detents (remember to use o-rings on it)
4) X-valve (comes with LX and parts)
5) RT Pro sear with RT pro sear pin
6) Rail bushing
7) Field strip screw
8) Field strip screw washer (clear plastic)
9) Logic frame
10) Front frame screw (10-32 button head screw) w/ washer
11) Cocker threaded barrel
12) 4 - 90 degree air elbows
13) Male and female quick disconnect
14) RT pro front grip ASA adapter with screw
15) 2 - sections of braided hose
16) rail/drop forward and on/off ASA adaptor
17) gas thru grip.

I recommend against macroline unless you're willing
to put in some research and get one with at least 850 psi
working pressure. If you still want to go that route,
you will need 4 macroline adapters in place of the elbows
and the macroline instead of the braided hose.

[ramennoodles]

totally agree^^except i like macro.

[kauai_paintball]

Originally posted by yaddatrance
If you're going Karta w/ a logic completely from
scratch you will need:
8) Field strip screw washer (clear plastic)
10) Front frame screw (10-32 button head screw) w/ washer
12) 4 - macroline adapters
13) Male and female quick disconnect
14) RT pro front grip ASA adapter with screw
15) 2 - macroline sections
16) rail/drop forward and on/off ASA adaptor

I decided to go with macroline, because i like it better.
And the the rail/dropforward, what is the rail? why do i need it? what is it? what dose ot do? dont i just get a drop forward and connect it to the gripframe?and the on/off ASA adapter, where do i get one? and the front grip adaptor, where do i get that? where do i get the frame screw? and the screw washer, it that the same as the banjo orings? i have no clue. help.

[yaddatrance]

Sorry, I should have made it clearer...

It's rail OR drop forward... If you get the Karta,
nicad will (if requested) mill the slot so you can
add a foregrip... The foregrip adaptor is a stock AGD part,
as is the screw and the washer. (and they're not
the same as a banjo o-ring.)