Intelliframe to Rev Linkage, AGD Picture Story How Too>>>

[AGD]

Guys,

You have all been wanting to know exactly how to hook the Intelliframe to the Rev. Here is what we have so far in the picture story. This is not complete with text descriptions but we just wanted to get the pics up here and get your feedback. We are interested to know if this level of detail is too much, just right or not enough.

Thanks

AGD




http://www.automags.org/~TomAGD/a100.jpg

http://www.automags.org/~TomAGD/a200.jpg
<B>
Earphone Extension Cord Radio Shack #33-176a
Roller Lever Switch Radio Shack #275-017A
Steel Machine Nuts Radio Shack #64-3017A
Round Head Machine Screws Radio Shack #64-3010A <B>

http://www.automags.org/~TomAGD/a300.jpg

http://www.automags.org/~TomAGD/a400.jpg

http://www.automags.org/~TomAGD/a500.jpg

http://www.automags.org/~TomAGD/a700.jpg

http://www.automags.org/~TomAGD/a800.jpg

[AGD]

http://www.automags.org/~TomAGD/a900.JPG

http://www.automags.org/~TomAGD/b10.JPG

http://www.automags.org/~TomAGD/b100.JPG

http://www.automags.org/~TomAGD/b200.JPG

http://www.automags.org/~TomAGD/b300.jpg

http://www.automags.org/~TomAGD/b400.jpg

http://www.automags.org/~TomAGD/b500.jpg

[AGD]

http://www.automags.org/~TomAGD/b600.jpg

http://www.automags.org/~TomAGD/b700.jpg

http://www.automags.org/~TomAGD/b800.jpg

http://www.automags.org/~TomAGD/b900.jpg

http://www.automags.org/~TomAGD/c100.jpg

http://www.automags.org/~TomAGD/c200.jpg

http://www.automags.org/~TomAGD/c300.jpg

[AGD]

http://www.automags.org/~TomAGD/c400.jpg

http://www.automags.org/~TomAGD/c500.jpg

http://www.automags.org/~TomAGD/c600.jpg

http://www.automags.org/~TomAGD/c700.jpg

http://www.automags.org/~TomAGD/c800.jpg

http://www.automags.org/~TomAGD/d100.jpg

http://www.automags.org/~TomAGD/d200.jpg

[AGD]

http://www.automags.org/~TomAGD/d300.jpg

http://www.automags.org/~TomAGD/e100.jpg

http://www.automags.org/~TomAGD/e200.jpg

http://www.automags.org/~TomAGD/e300.jpg

http://www.automags.org/~TomAGD/e400.jpg

http://www.automags.org/~TomAGD/e500.jpg

http://www.automags.org/~TomAGD/e600.jpg

[AGD]

http://www.automags.org/~TomAGD/e700.jpg

http://www.automags.org/~TomAGD/guts02.jpg

http://www.automags.org/~TomAGD/guts04.jpg

http://www.automags.org/~TomAGD/guts06.jpg

http://www.automags.org/~TomAGD/guts07.jpg

http://www.automags.org/~TomAGD/guts07a.jpg

http://www.automags.org/~TomAGD/guts07b.jpg

http://www.automags.org/~TomAGD/guts07c.jpg

[AGD]

http://www.automags.org/~TomAGD/guts07d.jpg

http://www.automags.org/~TomAGD/guts07f.jpg

If your circuit board does not have a reglator but looks like the one on the right then follow the next steps


http://www.automags.org/~TomAGD/guts10b.jpg

http://www.automags.org/~TomAGD/guts10c.jpg

http://www.automags.org/~TomAGD/guts10d.jpg

http://www.automags.org/~TomAGD/guts10e.jpg

http://www.automags.org/~TomAGD/guts10f.jpg

[AGD]

http://www.automags.org/~TomAGD/guts10g.jpg

http://www.automags.org/~TomAGD/P9280025.jpg

http://www.automags.org/~TomAGD/P9280026.jpg

http://www.automags.org/~TomAGD/P9280027.jpg

http://www.automags.org/~TomAGD/P9280029.jpg

http://www.automags.org/~TomAGD/P9280060.jpg

http://www.automags.org/~TomAGD/P9280080JPG.jpg

[Vil3]

looking awesome tom.... although im an e-mag user i still think the frames are the best in the world

[jog]

Its really well done. you could do it without any text because of the detail of the pics.

[Otis]

haha this is swet good job.. so anyone lese done it? hows it work?

[mikey101]

I think this should be a classic so we don't have to search for it once we have a rev and intelliframe. now all i need is a 12v revolution:)

[Otis]

i just ripped apart my revy .. played aroudn with sum wires and tryed it out.. .. in stead of cutting the red wire though i took the bottom plate off my revy and attached it under there.. that way i didn't have to worry about altering any part of the stock revy so it is all fixable..

[ShinyGuy]

Looks great.

The only thing is it isn't very clear if you're cutting the red wire or just removing some insulation. You can tell from the next picture but its always better not to have people complain to you when they screw up their stuff :)

[TylerDurden]

Good work AGD

[zvanut]

TOM,
u r good, even i could do that now.

[Trent-MaximuS]

Great detail, no need for words! Also like the custom form revo for warp hose. How did you do that?

[ah137]

Tom how about one for the E-mag to hopper power on the revo/T-rev. That would be great!! Thanks Hills

[AkaEnder]

where did the molded for warp loader come from! I want!

[LeadBasedPaint]

I thought everyone had a Revy. Guess not. I just barely got mine and it's pretty sweet.

[Thordic]

Wow, that was great. Definitely should go in the historic forum.

One question - where do you split the signal if you are hooking up a revvy AND a warp?

[skipdogg]

looks good, i could even follow those instructions!

[Webmaster]

ooo - this will definately be on toms tech tips or another resource page when i get a spare minute!

[Dragoon]

Great work Tom!

What a company!
What a man!
What a product!

[Scorch]

Great pics... great coverage of the steps.

Top notch.

Scorch

[zads27]

AWESOME job TOM! I won't even use this mod, since I'm getting an E-mag, but I went through the whole thing, just because it was so good! Top quality, great job.

Hey Webbie or someone who has time (I have classes real soon), maybe try putting all the images together, or grouping them together on larger pictures?
That way this can be distributed more easily.
..Or group them to make a printer friendly version, so people can just print it out and not have to come to this website when they're doing it?

[OldSchoolMag]

Great job AGD!!!!
Very comprehensive.

[2000Sabre]

Tom,

Great job. Detail is sufficient enough to let anyone make this mod. I would like to suggest you take this to the next level. Add the appropriate words and create a PDF document, then add this to the AGD website and make it available for download under the manuals section. Of course I would like to see the same thing for the Intelliframe to Warp mod as well.

[FeelTheRT]

Tom Kaye, you are DA MAN!

[FeelTheRT]

damn it, i just measured the insides of my cocker trigger frame. that black roller sear thing won't fit :(.

[Chef123161]

Originally posted by ah137
Tom how about one for the E-mag to hopper power on the revo/T-rev. That would be great!! Thanks Hills

http://www.robagd.com/revy-hack/

[ben_JD]

Also check out a new AOer's contribution on a derivation of this project:

http://www.automags.org/forums/showthread.php?s=&postid=106698

[Sqweezer]

This may be a dumb question, but where does everyone put the wire that is loose after connecting the hopper to the gun(the male->female headphone jacks)? Tape it to the gun? Let it hang?

[PAINTBALLA01]

what if it's a 9 vlt hopper?

[Plastic_Mercenarie_39]

Wooohooo Score!!! it works great i cant wait to test it out!!!!!Oh yeah about the 9v i will be doing it on friends hopper soon so we will see how that turns out and then tell you!!!!But hey but for like a $5.00 mod id do it no matter how it worked lol!!!!!:D :D :D

[SuperOrangeTicTac]

I just spent an hour doing this and i am finished. Now i find that my revvy just keeps on spinning when i turn it on. What did i do wrong? Where did i go wrong? AHHH help!!!

[Plastic_Mercenarie_39]

ok here

[Plastic_Mercenarie_39]

here ya go

[MikeCouves]

I would still be afraid to screw it up :). Would you be able to send your intelliframe and revy/warp into AGD and they could do it for? Haha I am stupid.

[Ityl]

I don't like the idea of having an exposed microswitch P-M. I good hit could take it off or make it not work.

[Plastic_Mercenarie_39]

I have like awsome super glue it aint coming off unless i want it too!!!!!lol!!!!!:D :D :D

[SuperOrangeTicTac]

errrmmm ok, that still seems a lil odd tho having it outside like that

[Plastic_Mercenarie_39]

well it wont fit in my stock grip frame sorry for finding away around things and being original!!!!!!!!

[magking1971]

up

[bond1313]

Hey can some one tell me how if it is even possible to hook my intelframe up to a ricochet or a halo I have them both and can not figure out how to do it.

[PAINTBALLA01]

I hooked up intellifeed it only took about an hour and it was only like $9 ill give a review when i play with it

[Restola]

Question: when you do this mod, does the revy still spin when there is not a ball in the way?

i want it so that the revy ONLY spins when the trigger is pulled. i dont ever want it to spin if the trigger isnt pulled.

[Otis]

yeah it still spins when there is not a ball in the way

[bond1313]

Hey can some one tell me how to hook it up to a ricochet and a halo.

[MagDog68]

Well all you have to do to keep it from spinning is cover the sensors. Then it "thinks" there is a ball in the tube, even if there isn't.

[Otis]

or u could just unplug the eye all together. i thik i'll still work.

[ChrisRT]

I cannot get mine to work, why why why, my rt pro chops a lot of balls now my inellifeed won't work dammit, i set it up perfectly and when it is apart it works fine but as soon as i put breech on my revvy just keep spinning???

[X-Plosive]

okay e-mail me at [email protected] and describe your problem more clearly. I will troubleshoot you through it.

[MoserMan]

Help out a newbie...

Do you have to get the intelliframe to do this modification?

What is so good about the intelliframe?

What is the difference between the flatback and regualar inteliframe?

And how exactly is that radioshack switch thing go to trigger the revy when you pull the trigger?

[Shaft]

I just hooked up my intellifeed. I noticed that there is a lot of play in the mounting holes for the switch. Enough to keep it from working right.
If the Revvy keeps spinning:
Loosen the mounting nuts for the switch.
Push the body of the switch down away from the valve and retighten the screws.
The switch should click when you pull the trigger. If it doesn't, this adjustment will be needed.

[MoserMan]

Anyone have a quick response to the above question?

[Shaft]

Moser,

1. The intelliframe is designed for this modification. Do you need the intelliframe for this? Depends on how creative you are, really.

2. The intelliframe enables a mechanical trigger to have intellifeed capability. It's also a double trigger frame that is made to AGD specifications. The trigger throw is short and the frame is well made.

3. The finish. Glossy or not.

4. I don't know exactly. I've never looked that carefully into it.

[Dragoon]

Has anybody in Canada tried to do this yet?
I just received my intelliframe, but the RadioShack part numbers in Canada are different. According to their website they don't even carry the roller switch (just a non-roller version).

Any help finding these parts would be appreciated.


Douglas.

[Temo Vryce]

Originally posted by bond1313
Hey can some one tell me how if it is even possible to hook my intelframe up to a ricochet or a halo I have them both and can not figure out how to do it.

I don't know about the Halo but you don't need to hook up the intelliframe to the ricochet. It has a switch in the feed neck that activates as each ball passes through the neck. Take a look you see what I'm talking about.

[magilicous]

Tom u r the man! i just got my chrome intelliframe and it is AWESOME!!! thanks a lot 4 the step by step pic. drecions 2. they helped me a lot. Keep up the great work!