Possibly dumb X-valve Question

[mobius]

I just bought a used X-valve that has a Lvl-10 already installed and tuned.The tuning isn't affected by the body, right? So I should be able to just drop it in my gun and go, assuming it was properly tuned? Or should I dismantle the whole deal and start the tuning from scratch?

I'm asking instead of trying because I don't have a body right now, since I traded mine off and am awaiting the arrival of my new Dallara.

[Dayspring]

No. not body dependent.

[Enemy]

the only time you should start from scratch would be when changing bolts or valves.

[mobius]

Cool. Thanks guys. That'll make my life a little easier.

[mountainbob84]

If you are using a non-ULE body you could be in for some trouble. I threw an LX in to my mag a while back a that had already been adjusted and was having serious problems. The root of the problems was changing breech tolerances due to the diferences in barrel diameter. I fixed the problem but only after five hours of 220-grit'ing the heck out of the inside of the barrel breech. I recently switched to an ULE and have had absolutely no problems whatsoever. hope this helps