dragun TES

[sharpshooter1286]

does anyone know if my hpa tank will fit on this gun? ive heard things about the drop that i will not be able to put my tank on without adjusting it. will my evo 2 fit in the feedneck? also, does anyone have any thoughts/suggestions about this gun?

[The Action Figure]

good guns evo will fit what tank you got

[barberjohn]

good guns evo will fit what tank you got
wow, you sure do get to the point.

[sharpshooter1286]

Crossfire 68/3000 Aluminum tank

[The Action Figure]

thanks barberjohn :D I try

And I dont see why the tank wouldnt fit :confused:

[ProX9]

tank wont fit, evo needs sanding, and bought 2 tes' that didnt work right out of the box. thats to the point

[t33kyboy]

the tank will screw on to the asa but the asa may need to be moved farther back in order for the tank to screw in all the way.

[ProX9]

you also cant use a new drop without a new reg and vice versa.

[barberjohn]

yea, the tes' drop is metric, which makes it practically useless with air. just invest in either a rail or another drop. i didnt know that they could be adjusted, i thought they were fixed like every other spyder clone stock drop :rolleyes: .

[t33kyboy]

i was wrong, dont listen to me.

[barberjohn]

you also cant use a new drop without a new reg and vice versa.
well, for one, tes's dont exactly need a reg, it is just for more consistency. also, the reg on the tes's sucks anyways, probably restricting airflow more than regulating it :rolleyes: . i would go with a new drop, then once you feel like it, just go ahead and get something like a gladiator reg, cheap but works very well :D .

[jesseyo13]

Im actualy very impresed with the TES. 200$ for an elctro marker with eyes, thats cheaper than the eye upgrade for almost every gun. I shot a 20oz tank on one and it didnt have any problem with it at all. I also say a 68 nitro duck on it that fit fine too.

[sharpshooter1286]

ok, so will i need to buy anything if i dont want to? cant i just adjust the drop somehow on the gun? and won't sanding the evo's feedneck make it weaker?

[sharpshooter1286]

couldnt i just buy like a cheep java feedneck or something and take the stock one off, or is it welded on?

[tyrion2323]

(1) you can adjust the drop on the TES.
(2) you can get new feednecks
(3) you can use it with either CO2 or Nitro
(4) You will want a few upgrades: regulator, bolt, grips, barrel

If you need any info, parts or service on your TES, contact me.

[gc82000]

The dragun Tes is a good gun, and it is so easy to improve. The reg, yes it sucks, get a torpedo, expensive but can be used on any gun. Barrel, really sucks, from what I have seen the Pipe system is the best. The feed neck can be changed with any thing that will go on a Spyber, so no worries there. And for the frame The One kit. It can turn a Tes into a Timmy in a bout the time it takes to install it.

[xXHavokXx]

Some times the regs don't regulate. I've seen one that no mater what you did witht he screw it always output 500.



At least they don't explode like the Airstar nova.