durtysoufcraka
06-12-2004, 05:01 PM
i got my emag a while ago and had never used it...until today. and i am displeased. here have been my troubles:
1. my wap was broken but i found a way to re solder the battery wire to the circut board after much hardship and burning the HELL out of my hand. might be pics of this later. who knew soldering irons stayed so hot...oh right it was still plugged in...wow that hurt.
2. i got my tank filled earlier today to ~4300 psi...well the gauge reads ~2200 by the time i gass up2 hours later. WTF.
3. well once i gass up i try to shoot...nothing happens. well dammit i dint have the battery charged. i just bought radio shack part 273-1779 and adapter "M" earlier today so i can charge the battery to test if that was the problem. even though the led screen lit up. i'll try it.
4. i finally got a shot off on mech mode. then a second then a third...but that broke. my probs there were i forgot to check the insert on the freak. and it was far too small. also the warp doesnt feed w/o power from the gun...or to be more precise it doesnt feed w/o the intelli link idk why. maybe you could help me w/that.
5 after a few shots i heard a leak...NOOOO. all these problems felt fixable except a leak. well i took of my mask after putting the safety on and listened for the leak. not from the new hose...it was inside the valve. so im guessing its a power tube leak...i have spare o-rings. i only have lvl7 bolt and tube. so if you could help me knojw what to look for and what to maybe listen for and then how i can fix that leak. although it went away after i fired again. WTF? again.
6. the warp worked while i held the little white button. and shot well. but i cant hold that button the whole time. or can i. is there a way to make the warp feed if there is no intelli linkk. i unplugged the intelli cable but it still dint do nething.
in summary the questions i need answered:
-can the battery be so low as to not fire the marker but still light up the LED screen?
-can i make the warp work w/o the intelli cable if my betterys die in a game?
-what makes the warp know when a shot has been fired if no intelli cable is there?
-what should i do if my valve leaks?
*where should i listen
*what do i look for if the problem is o-rings?
*why did the leak go away after a shot?
*could the problem be lube?
-why does my tank suck?
thank you for any help you can provide. and thank you for listening to my problems.
-durty
hopefully i'll be on the field tomorrow...so hopefully. :( :confused: :rolleyes:
WORK EMAG!! :mad: :cry:
1. my wap was broken but i found a way to re solder the battery wire to the circut board after much hardship and burning the HELL out of my hand. might be pics of this later. who knew soldering irons stayed so hot...oh right it was still plugged in...wow that hurt.
2. i got my tank filled earlier today to ~4300 psi...well the gauge reads ~2200 by the time i gass up2 hours later. WTF.
3. well once i gass up i try to shoot...nothing happens. well dammit i dint have the battery charged. i just bought radio shack part 273-1779 and adapter "M" earlier today so i can charge the battery to test if that was the problem. even though the led screen lit up. i'll try it.
4. i finally got a shot off on mech mode. then a second then a third...but that broke. my probs there were i forgot to check the insert on the freak. and it was far too small. also the warp doesnt feed w/o power from the gun...or to be more precise it doesnt feed w/o the intelli link idk why. maybe you could help me w/that.
5 after a few shots i heard a leak...NOOOO. all these problems felt fixable except a leak. well i took of my mask after putting the safety on and listened for the leak. not from the new hose...it was inside the valve. so im guessing its a power tube leak...i have spare o-rings. i only have lvl7 bolt and tube. so if you could help me knojw what to look for and what to maybe listen for and then how i can fix that leak. although it went away after i fired again. WTF? again.
6. the warp worked while i held the little white button. and shot well. but i cant hold that button the whole time. or can i. is there a way to make the warp feed if there is no intelli linkk. i unplugged the intelli cable but it still dint do nething.
in summary the questions i need answered:
-can the battery be so low as to not fire the marker but still light up the LED screen?
-can i make the warp work w/o the intelli cable if my betterys die in a game?
-what makes the warp know when a shot has been fired if no intelli cable is there?
-what should i do if my valve leaks?
*where should i listen
*what do i look for if the problem is o-rings?
*why did the leak go away after a shot?
*could the problem be lube?
-why does my tank suck?
thank you for any help you can provide. and thank you for listening to my problems.
-durty
hopefully i'll be on the field tomorrow...so hopefully. :( :confused: :rolleyes:
WORK EMAG!! :mad: :cry: