crazy idea that just came to me

[blackclown]

Ok this maybe imposibly but would it be possible to buy a angle trigger and change it into a mag trigger. From looking at the trigger it does not really look that hard. If u can please tell me which trigger you would buy for your mag if any that would help me that would be 1 more step to trying this crazy idea.

Here r some pictures of the trigger that i think i would do.

[elpimpo]

you could probly hack off the back of the angel trigger and get it to work

[blackclown]

ok now another question if i did that do u think that u would be intersested in buying it?

[JrnyFan1985]

nah, i wouldn't. i bought a mag to make it a 'mag, not an angel.

[elpimpo]

buy the mag or the triger? just curios the answer no on both but i was wondering which one u were talking about

[blackclown]

the trigger. do u think this is 1 if those stupid ideas not worth trying?

[68automagpwnr]

well, if you could get it to work, a lady trigger for a mag would be awesome but i wouldnt buy something that might work, id have to know it would work for sure.

[Target Practice]

Personally, I would like to see a naked lady (trigger) that will go on an intelli. Hell, even the lightning one is pretty cool.

[amoeba]

nice idea

you gotta have a spot for the sear you know.

[blackclown]

well, if you could get it to work, a lady trigger for a mag would be awesome but i wouldnt buy something that might work, id have to know it would work for sure.


if i can get it all done then i will contact u.. i don't even have money to buy 1 yet so it will be awile

[68automagpwnr]

sounds good, if it works, i will buy a lady trigger one. If it makes a difference i have an Xvalve with a ULE. iunno just thought it might be good to know incase it effected anything

[Enemy]

if you can get the pivot points to match on the triggers and you only use them for mechanical mags then yes it would work just fine just remember to flatten the point of contact for the trigger rod to have a nice place to rest and there shouldnt be a problem.. wow im surprised i havent seen any of these...maybe the pivot points arent the same!!

[Enemy]

pivot points arent the same you would need to machine these bad boys all new there is now you can buy it made for an angel and expect it to work for a mag it just wouldnt be possible... here are links to the agd replacement triggers!! sory i dont know how to post pics on forums yet.http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=260&categoryID=16 and
http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=259&categoryID=16

[judster]

do you by chance know who makes those triggers? id like the lightning bolt. those would look pretty cool on a mag

[Fred]

those are stock bolt on upgrades for the angel... mass produced...

[blackclown]

i talked to elpimpo and he said he would try it on his stock angel trigger lying around.

[OysterBoy]

Noone can argue those would look pimp on either of the vert frames available on the board..

[elpimpo]

well heres what i found out. the pivot hole on the angel trigger is to small: so i bored it out a little. the big problem i ran into is that the angel triger is like an eigth inch fatter than the mag trigger. all i had was my trusty utility tool (it was 12 and i couldnt get down to the shop.) so i hacked off the back of the trigger and started filling away. it took me like 2 hours to file it down enough (granted i was watching tv and talking on the phone at the same time) all in all its kind of cool looking, a lot better than the stock one, but it took a lot of work. a dremmel or a grinder would help out a hole lot in this procces.

[blackclown]

Awsome.