PDA

View Full Version : IT mag bodies- opinions?


BlackWeenie
07-12-2004, 09:45 PM
im thinking about getting one of these bodies since im poor and cant afford a ULE. has anyone tried one or heard anything about them cause i dont want to buy some piece of garbage just because its cheap. any thoughts would be appreciated. oh, heres the link for reference

IT body (http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&category=10554&item=3688291746&rd=1&ssPageName=WDVW)
Dayspring
07-12-2004, 10:43 PM
There is a problem with the feed tube going too far into the breech and the bolt rebounding off it.

Blazingace had to loctite it in after dremeling a curve that matched the breech.
BlackWeenie
07-13-2004, 12:38 AM
thanks, dayspring

hmmm this would be a problem... anyone else heard/seen anything about these
sneakyhacker420
07-13-2004, 12:43 AM
i was talking with tuna about these, and he advised me that many of them are off-spec, and this is the only body not milled from a true AGD slug, and it is not approved by AGD

some of them also have an aluminum washer inside them rather than a stainless one as its supposed to, which poses the risk of the bolt punching through the breech
BlackWeenie
07-13-2004, 01:35 PM
ok thanks everyone, it looks like i wont be picking one of these up.
Koosh
07-13-2004, 01:58 PM
Were ALL IT bodies not made from Slugs?

I bought one used off of a friend who got them when they were relatively new here on AO... It had the washer in it already.

Stilll looks nice too :)
jarley77
07-13-2004, 03:35 PM
I love mine!!

i also bought mine used and it had the washer in it too. but i have had no problems and i love mine

http://www.jayloo.com/files/pics/2000/Jareds%20Emag%2038537_rs.JPG
Xtreme Depot
07-15-2004, 10:08 AM
We have not had any come back to us here at Xtreme Depot Inc.

Xtreme Depot Inc. maker of the I.T. automag bodies is out of business. I want to thank all of you who have supported the bodies and my store.
If any of you are intrested in getting a body go to ebay and find this user he is selling the bodies alotfy1 . He is a good guy. He made them for me and I have since gone out of business and I am not selling these anymore. I just could not compete with the internet stores.
Here is a link to one of his posts on ebay. Like I said he is a excelent guy to deal with.

http://cgi3.ebay.com/aw-cgi/eBayISA...B%3AEF%3AUS%3A1


Thank You
Matt
Xtreme Depot Inc. (Now out of buiness)