shootdown?

[Twitch_DGA]

if i put a regulator on my mag to limit the imput presher will get shootdown? i dont think i should i whant to nock the 800-900 psi down to 700psi so i only shoot once per trigger pull. oh ya and i already have the ult

[MayAMonkeyBeYourPinata]

English please.

But a reg will cause shootdown if that is what you are asking

[usmc8892]

Yes, it won't recharge fast enough to supply your 'mag.

[Twitch_DGA]

at what speeds will shootdown happen?

[AcemanPB]

You'd be better off selling your nitrogen tank and buying an adjustable nitrogen tank

[Twitch_DGA]

i dont have the money. all i am trying to do id stop my triget from having a sweet spot. it is shooting 2+ balls if i pull the trigger slow. and i baught the ult with the gun to stop that. the gun just got this problem a few days ago. is it the imput from the tank that is causing it?

[RoboBeaver]

yea the input from the tank is probably set abit too high, but thats strange, i have stock xvalve (no ult) and a crappy screw in and SOMETIMES when i pull the trigger over like 2 seconds it resets my fingerso it shoots twice, but not when im fireing fast, you should invest in a good adjustable tank though, thats what im going to do, when i get the money, damn expensive Maxflo's

[GT]

make sure your field strip screw is all the way in. migh be cheaper to buy a ult kit and try to "tune out" any bounce.

gt

[The Spanish Inquisition]

you might try adjusting your trigger rod. less clearance between the trigger and the connecting rod tends to limit bounce.

[trevorjk]

you might try adjusting your trigger rod. less clearance between the trigger and the connecting rod tends to limit bounce.


um there is no need to do this...


if you are getting bounce becuase of your ULT it is cuase you have not gotten it tuned yet... i suggest taking out one shim from the ult