Eclipse splash rail mag barrel pin thingy??

[<Echoes>]

Okay, so I have an eclipse splash kit on my current mag. I plan on ordering an RT ULE custom and sticking the splash kit on there...and then putting the extraneous RT ULE parts on my old mag. My question is...since the ULE body accepts autococker barrels instead of mag barrels, will I have to take this little pin thing out of my eclipse splash rail? If so, is there any other way to do that than to hammer the thing to oblivion until it flies out of the rail? I've already done that once in my lifetime, and it wasn't pretty...

Thanks for any help.

[Blazestorm]

You gotta use a hammer :p

[ß?µ£ §mµ®ƒ]

squeeze it out with a vice and towls so it dosent get scratched

[WickeDKlowN]

They come out pretty easy, just put the rail in a soft-jaw vice(or use a rag in a normal one) and tap it with a hammer. Mine popped right out.

[Blazestorm]

They lie... use a sledgehammer! :D

[Snertz]

Shmeh, Primative beasts at best! :D :p

Step up and cut/drill it out with a dremel!

[Major Ho]

Warpig article, look exactly halfway down beside the picture of the rail (http://www.warpig.com/paintball/technical/paintguns/automag/ulemag/index.shtml)

[Automaggot68]

They lie... use a sledgehammer! :D
::ques his Peter Gabriel album::

[Automaggot68]

You gotta use a hammer :p

You guys remember that National Lampoon's movie?

Clark: RUSS! GET IN HERE
Rus: I'm right here, Dad.
Clark: Oh. Go get me a hammer
Wife: Clark, what are you going to do with a hammer?!
Clark:........WE'RE GONNA WRAP IT UP.....AND SMACK IT WITH A HAMMER ! ::makes hand motions:

[<Echoes>]

wow okay, thank you for your help everyone. :D