30 lb grab bag from AGD

[TAW]

Hello AO, I'm the sucker that won the Ebay auction. Man what a load of crap. I've been trying to clean some of it up to resell for the last two days. I'll most likely throw most of it away. But the pieces I did find in it are, well, interesting.

http://i16.ebayimg.com/03/i/02/4f/cf/6e_3.JPG

[TAW]

http://www.jayloo.com/files/pics/7000/Fieldvalve_6193.JPG

[Muzikman]

So you are the one. Don't throw anything away, I might be interested in some of the crap. I am just really curious. Take more detailed pics of the vert feed gun. I am really curious about the rail and valve.

[vf-xx]

OOohhhh Project Rails!!!!

I want some!

[TAW]

Sydarm 217
Sydarm 071
Lvl 5 ? PT was C-cliped in, no PT tip 176

http://www.jayloo.com/files/pics/7000/Oldvalves_3456_rs.JPG

[TAW]

http://www.jayloo.com/files/pics/7000/valves_1245_rs.JPG

[Pballwizz]

Oh man, I desperatley want one of the Old School Mags.

[TAW]

The Sydarm had a little light bulb in the clear tip. The wires ran down the top of the barrel, around the grove in the barrel by the oring. Then out the bottom of the body, into the pump rail then through the hole on the rail. I have not gone throu the grips yet to see if ones mod. for batteries.

The bottom rail was with the Valve #176

http://www.jayloo.com/files/pics/7000/Sydbody_9988_rs.JPG

[-=Squid=-]

Jesus... how much did that auction cost you?

[FooTemps]

OMG
YOU'RE THE MOFO THAT WON THAT!?!?
AHHH!!

Could you take more pics of that really weird classic mag with the "ule" rail, weird valve and weird vertfeed body?

[Lee]

i'm pretty sure the c clipped valve is a level 5. i have an old bumper (the bumper is new never used) for it if you're interested. make an offer.

[68magOwner]

how much for a scrapped together classic? dont care what it looks like, dont need asa, just stripped down mag, VA with ss line is fine for me, just as cheep as possible, please PM me

[Carazy]

I bet the shipping was cheap.

[Empyreal Rogue]

Is that an E-Mag Battery House at the bottom of the first picture? I got dibs if it is!!

[Wc Keep]

hey if those are level 7 bolts i need one desperately for this sunday.

[Muzikman]

Ahhh..ok...the "bulb" in the front of the sydarm were from the police training days. They use to have the interior of a small house setup in a garage and had video cameras in each room. when they did the training the guns had lights on the front of them so in the video they could tell who fired first.

[i_baked_cookies]

whatever you do, dont throw it away. you can make a fortune from that stuff.

[AGDlover]

WOW!!!! i would start on a coupple of project mags and you should try and give one away at shatnerball for like a giveaway drawing

[DiSoRdeR]

How much would you sell a complete mag and a sear for? Interested :D

[ProX9]

I hella want one of those if i can get it cheap.

[LittlePaintballBoy]

One of what?

[TeamNausea]

the thrown together mags im guessing

[FooTemps]

i'd like a blue barrel and rail and foregrip, if you are selling stuff...

[Snertz]

How much you want for a blue VA/SSline , Rail, barrel and gripframe? PM me!!!! :D :D

[Will Wood]

I missed that auction.. how much did you pay for it all?

[TAW]

I don't know if I have the balls to air these up :eek:

http://www.jayloo.com/files/pics/7000/valves2_1861.JPG

[RingOfScale]

hey i'd take one of those basic grey bodies, a rail, and a barrel ...

[TAW]

Most of this stuff will be for sale but not now. In this pic you can see that this stuff has "rental rash". The bodys and rails have pump slots, I can make pump rods and thats how I'll list them. Please do not make offers in this thread. Thanks

http://www.jayloo.com/files/pics/7000/rails_5765_rs.JPG

[Aliens-8-MyDad]

are those things bent or is that just the camera...?

[RobAGD]

You have some fun Proto stuff there :)

The one with the flatline looking piston was a proto of the m-303 valve.

Then you have what looks like an EARLY proto RT valve

heheh what fun

-R

[FragTek]

The Robinator lives! :) Haven't seen u do much postin' lately bud. I gotta stop by the shop some time and shoot the sh*t for a bit. Wow I was a poet and didn'e even know it.

[gc82000]

Wow is all that I can type. :wow:

[Blazingace]

I am speechless...........you have almost the entire history of AGD in a bag. That kicks ***.

[Pickle]

The apparent curvature of the barrels is due to the wide angle of the lens.

[Stealthgerbil]

Those blue rails are awsome!

[AGDlover]

its actualy your computer thats makeing it look like that. ok a way to prove it is take a ruler and put it over the rail. wow it isn't bent anymore!!!

[1ofkind]

Nice man, looks like alot of fun.

[Adrenaline_Junkie]

its actualy your computer thats makeing it look like that. ok a way to prove it is take a ruler and put it over the rail. wow it isn't bent anymore!!!

I put a piece of paper up to test that cus i know that can happen and well....your wrong. The photo actually makes the rail look bent not the screen. Im guessing it was because of the lense he used on his camera.

[Pickle]

Suffice it to say that the barrel is not bent.

[Adrenaline_Junkie]

If you put a straight line up to the barrel or the bottem rail the pics show the parts as bent. Althou im sure they are not the pic makes them look bent, even if ya put a straight edge to em they are bent.

[dyeguy65]

dude...you are incredibly lucky. i would give one of my kidneys for that package.

no seriously...


DG

[Hexis]

Adrenaline_Junkie its just an effect from the lens on the camera. Most wide angle lenses are not completly distortion free. Expensive high end ones are better than cheap ones, but it's all but impossible to eliminate completly.

[Adrenaline_Junkie]

I know its an effect from the lense. Thats what i was tryin to say. Someone said it was straight but looks curved cus of the computer screen and that if you put a straight edge to the picture it really is straight, but it really isnt. Sorry for any confusion there lol. I know that it was because of the lens though.

[TAW]

It's not the lens. I carry three barrels on the field, One shoots out the left side of the bunker, the other right and one for strait down the middle.

http://www.jayloo.com/files/pics/7000/P1010024_7876_rs.JPG

[Adrenaline_Junkie]

It's not the lens. I carry three barrels on the field, One shoots out the left side of the bunker, the other right and one for strait down the middle.

:rofl: GOOD ONE! :rofl:

[Bad_Dog]

It's not the lens. I carry three barrels on the field, One shoots out the left side of the bunker, the other right and one for strait down the middle.

http://www.jayloo.com/files/pics/7000/P1010024_7876_rs.JPG


LMFAO

[LunchBox89]

i hate asking this but you didnt get a extra pull pin and velocity spring did you cause im in desprit need of one :cry: :cry:

[RTSeal]

TAW: please PM me when you go to place these items for sale. I am interested in a blue
rail, and blue barrel. You can reach me at Jcc@SoFlaReo.com.

I remember this ebay auction it went for just under $700.00 you are lucky, I did not need everything in that auction so I did not bother placing a bid to save the winning bidder additional costs. You made a good buy. :hail:

Thank you,

JCC

[MasonFootball89]

Send me the parts that you think you may throw away and send a list of what they are then Ill do something wtih them.