View Full Version : Minimag Leaking Out Back
Subzero85963
10-26-2001, 07:15 PM
AAAAARGH,
My minimag is leaking out of the back, where you would adjust the velocity, i replaced the seals, but it still leaks, im out of ideas any help would be appreciated
thanks
matt
try turning the velocity down
Have you changed in the regulator body the regulator piston o-ring? If that is old or broken it will leak.
FeelTheRT
10-28-2001, 07:44 AM
make sure your velocity is not too high and also check the o-rings making sure non of them are damaged.
ElementEclipse
10-29-2001, 08:53 AM
my micro mag did the same thing, before putting on your tank screw the velocity down really low, then when the nitro si on your gun, turn up the velocity and it should work fine. My gun did the same thing.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.