View Full Version : Automag with c02 leak
Slutzinator
09-30-2004, 04:03 PM
i just got an automag .68 and it has co2 coming out of the barrel, what should be the first thing to check?
space_weazel_45
09-30-2004, 04:22 PM
hold the trigger back, if it still leaks check the on/off, if it stops check the PT oring as stated above. simple mag mechanics.
report back with results.
If that powertube oring is fine it could be the spacer or spring thats in the powertube also. If the oring is fine you might need a longer spacer which can be bought in a packaged kit pretty cheap.
Mirage
10-12-2004, 04:16 PM
I have the same problem as this guy so instead of starting a new thread with the same problem I thought I would add it here......
My miniMag is leaking down the barrel at a huge rate... When I hold the trigger back the leak stops. I have bought a parts kit and spacer kit and replaced all o-rings in both on/off assembly and power tube and tip.. I have used ever size spacer and I still have the same issue.. My power tube is not cracked.. Does anyone have any ideas???
Thanks
Mirage
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.